This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

15° HOLY PRO KITEBOARD Drilled, Sanded, Gripped with Bolt Kit 11-13ply

schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...


TRAMPA's 15° HOLYPRO Kite Board deck is a slimmed down, lightweight version of the original 15° Short Deck. It is primarily designed for Pro Kite Boarders demanding a short & light, fast spinning deck to achieve huge air & aerial freestyle moves. But its short light weigh-ness also makes it an excellent choice for young or smaller advancing riders, as the deck gives incredible performance advantages over a basic wooden deck usually associated to the kids decks. The 15° HOLYPRO is specifically designed to fit to Skate Trucks & is often purchased as an up-grade to replace a non-responsive wooden deck that's usually found on other brands boards.

The 15° HOLYPRO Kite Board is available in 3 different flex rates, 11ply is the most flexible & lightest, 13ply is the stiffest/heaviest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you, or mail this link if you need some extra guidance. The 15° HOLYPRO is only available when supplied as Drilled for Trucks, Edged & Sanded smooth, with fitted Grip Tape & including a complete deck Marine Grade Stainless Steel Bolt kit.

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! Our incredible composite material is so strong whilst so flexible; the material will not split, delaminate or break in anyway, regardless off the environment you ise it in. TRAMPA decks are considered the poppiest decks on the market, the performance is un-matched. You will pop higher & have a more cushioned landing thanks to the performance of the deck! All TRAMPA Decks are made to order to suit the riders weight, ability and personal preference - perfection!

2 Foot of 9 Inch Wide Jessop Grip Tape for Longboards

Mega Grippy & really easy to apply. Ensure the decks surface is clean & dry before application. Easy to custom shape, simply draw your shape on the back & cut out with Scissors or sharp knife. Remember to use a ruler for clean edges. Watch your fingers when slicing, please ask an adult to make this work if you are under 16 & please remember, when you draw on the back of the grip tape remember its a mirror image so do everything in switch! Use a template for best results... :-)

M5 x 25mm SKATE Truck Bolt kit - 12/15ply Decks BK02

This M5 x 25mm HEX HEAD BOLT KIT is used to fix TRAMPA Skate Trucks & TRAMPA Spring Trucks to Regular Ply (12-16ply) TRAMPA Decks. The correct sized bolt avoids excessive thread exposure on thinner ply decks, improving visual appearance by giving a better fit.

Using Marine Grade Stainless Steel for our fixings means these bolts will never rust on you! They can cope with any bad terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks which commonly turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being totally Non Corrosive all of TRAMPA's Bolts are dipped in ENGINEERS BLUE THREAD LOCKING PASTE whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system. This double security ensures the Nuts & Bolts stay tight for as long as possible allowing you to stay focused & push the boundaries of your equipment with the piece of mind that nothing is going to fail on you. Use 2 x 8mm ring spanners to tighten the M5 Nut onto the M5 Bolt. Ensure all your Nuts & Bolts are nice & tight before you ride!

Weighing just 18 grams for the entire set these Nuts & Bolts are very lightweight & being made from A4 Stainless steel they also look incredibly sexy!!

130mm Top of the deck Hand made Vinyl Sticker - SILVER

Everybody loves stickers, especially TRAMPA VINYL stickers! TRAMPA vinyl's are pain-stakingly hand made at TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years. These SILVER vinyl stickers are sized to fit onto the top of the Trampa deck, the dimensions are 130mm long x 28mm high.

There are loads of colours to choose from and the price starts at just 30 pence each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap to do... Help TRAMPA the world with the Pimp-est vinyl stickers EVER!

To Apply - Ensure the surface is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly. This VIDEO may help...

580mm Under Board Hand made TRAMPA Vinyl Sticker - SILVER

Everybody loves stickers, especially TRAMPA VINYL stickers! TRAMPA vinyl's are pain-stakingly hand made at the TRAMPA HQ using the absolute finest Vinyl material available! So long as the area it is to be stuck to is clean the Vinyl we use is guaranteed to stick well & not fade for well over 5 years. These SILVER Vinyl Stickers are sized to fit underneath the TRAMPA deck, the dimensions are 580mm long x 140mm high.

There are loads of colours to choose from and the price starts at just £2.50 each - so custom pimping your deck, car, van, boat, bedroom window or any other surface you can think of that would benefit with a TRAMPA logo slapped on it is really easy & cheap and easy to do... Help TRAMPA the world with the Pimp-est vinyl stickers EVER!

To Apply - Ensure the surface is clean & grease free before applying the sticker. Peel the thick side away from the Masking tape so the sticker appears in reverse (negative) and simply lay the masking tape onto the surface in question. Using your fingers or a soft cloth, rub the masking tape, forcing any air out of the vinyl & allowing the vinyl to stick well. Then gently peel away the masking tape to reveal the Vinly. This VIDEO may help...

Recommended decks

Rider's weight Suggested deck Deck Weight Flex
44 - 70 kg
(7 - 11 stone)
11 ply 1,700g firm
57 - 83 kg
(9 - 13 stone)
12 ply 1,850g stiff
70 - 95 kg
(11 - 15 stone)
13 ply 2,000g very stiff

TRAMPA's 15° HOLYPRO Kite Board deck is a slimmed down, lightweight version of the original 15° Short Deck. It is primarily designed for Pro Kite Boarders demanding a short & light, fast spinning deck to achieve huge air & aerial freestyle moves. But its short light weigh-ness also makes it an excellent choice for young or smaller advancing riders, as the deck gives incredible performance advantages over a basic wooden deck usually associated to the kids decks. The 15° HOLYPRO is specifically designed to fit to Skate Trucks & is often purchased as an up-grade to replace a non-responsive wooden deck that's usually found on other brands boards.

The 15° HOLYPRO Kite Board is available in 3 different flex rates, 11ply is the most flexible & lightest, 13ply is the stiffest/heaviest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you, or mail this link if you need some extra guidance. The 15° HOLYPRO is only available when supplied as Drilled for Trucks, Edged & Sanded smooth, with fitted Grip Tape & including a complete deck Marine Grade Stainless Steel Bolt kit.

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! Our incredible composite material is so strong whilst so flexible; the material will not split, delaminate or break in anyway, regardless off the environment you use it in. TRAMPA decks are considered the poppiest decks on the market, the performance is un-matched. You will pop higher & have a more cushioned landing thanks to the performance of the deck! All TRAMPA Decks are made to order to suit the riders weight, ability and personal preference - perfection!

In this Purchase you get the following items...
15° HolyPro Deck - Drilled, Edged & Gripped
Precision drilled Truck mounting holes.
Drilled for Bindings with a neat & flush countersunk finish
Countersunk grab handle holes drilled as standard.
Edged with a rough cut file & hand sanded until silky smooth...
2 foot x 9 Inch wide Jessop Grip Tape
BK02 - M5 x 25 SKATE Truck Bolt Kit - 12/15ply
BK10 - M6 X 25 Countersunk Binding Bolt Kit - 12/16ply
130mm Top of the deck Hand made TRAMPA Vinyl Sticker - SILVER
580mm Under Board Hand made TRAMPA Vinyl Sticker - SILVER
--------------------------------------------
15º HOLYPRO Deck Dimensions
Deck Widest Point - 228mm
Tip to Tip Deck Length - 855mm
Axle to Axle Wheel Base - 785mm
Tip Mounting angle - 15º (Skate trucks)






Quantity required:
RRP £165 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
Shipping cost to:

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon