This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

9 Inch MEGASTAR Hub - 2 Part Offset with Polished Rim with Silver Spokes fits with all of TRAMPA's different 9 Inch Tyres

9 Inch MEGASTAR Hub - 2 Part Offset with Polished Rim with Silver Spokes fits with all of TRAMPA's different 9 Inch Tyres 9 Inch DEEP DISH Off-Set MEGASTAR Rims POLISHED - Place two on the rear of your Electric Mountainboard for extra Grip & Top Speed! SILVER Anodised Superstar Spoke - Extruded T6 Aluminum Heat treated & CNC Precision milled Dupont Plastic Spoke support Spacer for the Superstar & Megastar hubs M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts M4 x 18mm Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel M4 Dome Head Nut - Stainless Steel
RRP
£70
inc tax

TRAMPA's 5 spoke MEGASTAR RIMs for 9 inch Hubs have been created for those who insist on fitting only 'the Very Best of Equipment'. They are a technically designed, super-strengthened, masterpiece's of circular lushness! They have been Precision CNC milled from a solid block of Aluminum, they were never going to be cheap to make or sell but not only will these precision made MEGASTAR rims improve your ride, but OMG they are so FXXXXN sexy you just have to have them once you have seen them!

The 9 inch MEGASTAR HUB will fit to ANY of the 9 inch Tyres in the TRAMPA product Range. The 9 Inch MEGASTAR Hub is so strong, it handles the highest inflation pressures of any small wheel on the market.... Increasing Inflation rates will ultimately increase maximum roll speed capabilities, making them the perfect option for the insane among us!

MEGASTAR Rims are available in Anodised Black with Laser Logo or as my favorite in High polished with Laser logo. The MEGASTAR rims fit perfectly with the same Spokes used in the SUPERSTAR hub with all the same colour combinations being possible, its difficult to decide the combination you like the most! As ive already said the Anodised Spokes used in the MEGASTAR hubs are the same as the spokes that are needed in the SUPERSTAR hubs, so if you already have SUPERSTAR hubs & wish to upgrade your rims to MEGASTAR then this works perfectly - They could also be the perfect Christmas present!!

TRAMPA Spokes made from Extruded 6061 Aluminum which has been T6 Heat treated (Super Strength Aero-grade quality) & comes in a nice range of colours to satisfy your taste. The MEGASTAR's hub construction is held together by using 'Socket capped' M4 x 40mm A4 (Marine Grade) Stainless Steel Nuts & Bolts.

M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR: 
 
SUPERSTAR HUBS
MEGASTAR HUBS

M4 x 18mm Socket Capped Head Bolt ISO 4762 Marine Grade Stainless Steel

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

SILVER Anodised Superstar Spoke - Extruded T6 Aluminum Heat treated & CNC Precision milled

This is a replacement or extra SPOKE for the Superstar hubTRAMPA's Superstar spokes are produced using T6 Heat Treated 6061 Aero-grade "Top Quality" Aluminum which is forced through an Extrusion Die. Extrusion means continuous which is how our Spokes are made, in one continuous piece. Once extruded the resulting profile is T6 Heat Treated. Heat Treating extruded 6061 Alloy makes the Alloy very very strong

The spoke is bead polished to take away and sharp edges then the spokes are sent away to the Anodisers to have the relevant colour added. Once the colour has been added the precision CNC machine is put back to work to mill out & accept the bearings into the bearing housing perfectly.. 

Check your spoke support spacers are in good condition when inter changing spokes & ensure all of your nuts & bolts are tight before you ride!

 

Dupont Plastic Spoke support Spacer for the Superstar & Megastar hubs

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

OMG! whats them??
TRAMPA's 9 inch MEGASTAR hubs come in 2 seperate parts & when mated together they are positioned in an OFFSET  position allowing more space on the hanger for the wider 9 inch wheel to fit with enough space for you feet! The 9 inch MEGASTAR HUBS have been created for those who insist on fitting only 'the Very Best of Equipment'. They are a technically designed, super-strengthened, masterpiece's of circular lushness! They have been Precision CNC milled from two pieces of solid Aluminum, they were never going to be cheap to make or sell but not only will these precision made OFFSET MEGASTAR rims improve your ride, but OMG they are so FXXXXN sexy you just have to have them once you have seen them!

The MEGASTAR HUB will fit to ANY of the 9 inch Tyres in the TRAMPA product Range. The MEGASTAR Hub is so strong it handles the highest inflation pressures of any small wheel on the market.... Increasing Inflation rates will increase maximum roll speed capabilities, making them the perfect option for the insane among us!

MEGASTAR Rims are available in Anodised Black with Laser Logo or as my favorite in High polished with Laser logo. The MEGASTAR rims fit perfectly with the same Spokes used in the SUPERSTAR hub with all the same colour combinations being possible, its difficult to decide the combination you like the most! As ive already said the Anodised Spokes used in the MEGASTAR hubs are the same as the spokes that are needed in the SUPERSTAR hubs, so if you already have SUPERSTAR hubs & wish to upgrade your rims to MEGASTAR then this works perfectly - They could also be the perfect Christmas present!!

TRAMPA Spokes made from Extruded 6061 Aluminum which has been T6 Heat treated (Super Strength Aero-grade quality) & comes in a nice range of colours to satisfy your taste. The MEGASTAR's hub construction is held together by using 'Socket capped' M4 x 40mm A4 (Marine Grade) Stainless Steel Nuts & Bolts.

Using 10x special Bolts & 10mm Spacers to position & hold a Brake Disk in place, the MEGASRAT Hubs can easily be modified to work with the MAGURA HYDRAULIC BRAKES, & PULLEYS for Electro motorising the products can also be fitted!! Drive Gears & Electric Motors which can also be fitted to these amazing MEGASTAR wheels to add power to your ride... 

TRAMPA ABEC 5 & ABEC 7 BEARINGS - 12 x 28 x 8mm & 9.525 x 28 x 8mm
TRAMPA’s very own & genuine ABEC rated Bearings have 2 Rubber Sealed sidewalls which protect them from the dirt they live in. They push perfectly into the any of the Hubs on the TRAMPA website as well as many other brands & they ensure the fastest spin rate possible. Use 12 x 28 x 8mm Bearings to fit the TRAMPA WHEELS to 12mm axles or you can use Bearing Reducer Sleeves to fit your existing 12mm Bearings onto 10mm or 9.525mm or 3/8ths of and inch axles. 9.525 x 28 x 8mm Bearings also fit TRAMPA hubs to 9.525mm Skate Axles.

Bearings can be purchased at a discounted price when purchased with Hubs.
2 x Bearings cost only £2.50 x 4 = £10 per set of 8 making a £5 saving per set!

NEW
Hot off the press, its now possible to fit TRAMPA SUPERSTAR & MEGASTAR Wheels to 8mm Axles... Using the SPOKE SUPPORT CONVERSION SPACER its possible fo fit the TRAMPA Wheels to regular 8mm Longboard truck axles no problems maing them fit to many many boards around the world, so if your Pissed off riding over the cracks on your street, its possible with the use of fitting the spoke support conversion spacer that these badass wheels are the wheels for your longboard

The following items are Included in this purchase...
9 Inch DEEP DISH Off-Set MEGASTAR Rims POLISHED - Place two on the rear of your Electric Mountainboard for extra Grip & Top Speed!
Extruded T6 Aluminum SILVER Anodised Spoke - CNC Precision milled
Super strength Dupont NYLON Spoke Support Spacer.
M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel
M4 Nut - Marine Grade Stainless steel Nylock Nut
Counter weight bolts
Counter weight Nuts
Weight: 392g
What Colour MEGASTAR Rims do you want?
What Colour MEGASTAR Rims do you want?
BLACK 9 Inch Deep-Dish MEGASTAR rims BLACK 9 Inch Deep-Dish MEGASTAR rims
SILVER 9 Inch Deep-Dish MEGASTAR rims SILVER 9 Inch Deep-Dish MEGASTAR rims
Quantity required:
We have enough parts to make…  
RRP £70 - per hub

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon