This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

ATB Skate Truck Marine Grade Stainless Steel Bolt Kit

ATB Skate Truck Marine Grade Stainless Steel Bolt Kit M5 x 20mm Marine Grade Stainless Steel Hex Head Skate Truck Bolt kit - for 11ply Decks M5 x 25mm Marne Grade Stainless Steel SKATE Truck Bolt kit - 12/15ply Decks BK02 M5 x 20mm Regular Hex Head Bolt - Marine Grade Stainless steel with locking paste M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings M5 Washer Marine Grade Stainless steel
RRP
£2.50
inc tax

This M5 x 20mm HEX HEAD BOLT KIT fixes TRAMPA Skate Trucks to 11ply HolyPro Decks only. The slightly shorter bolt avoids excessive thread exposure on thinner ply decks, improving visual appearance by giving a better fit.

Using Marine Grade Stainless Steel for our fixings means these bolts will never rust on you! They can cope with any bad terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks which commonly turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being totally Non Corrosive all of TRAMPA's Bolts are dipped in LOCTITE THREAD LOCKING PASTE whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system. This double security ensures the Nuts & Bolts stay tight for as long as possible allowing you to stay focused & push the boundaries of your equipment with the piece of mind that nothing is going to fail on you. Use 2 x 8mm ring spanners to tighten the M5 Nut onto the M5 Bolt. Ensure all your Nuts & Bolts are nice & tight before you ride!

Weighing just 18 grams for the entire set these Nuts & Bolts are very lightweight & being made from A4 Stainless steel they also look incredibly sexy!!

Trampa use only the finest A4 Marine Grade stainless steel in all of their hardware which means your Trampa can be used and handle the harshest of environments...

Use an 8mm ring Spanner and an 8mm socket drive to tighten your nuts onto bolts.

The shorter bolt avoids excessive thread exposure on thinner (11 and 12ply) decks.

Using marine grade Stainless steel to provide the finest quality nuts and bolts, this 8 piece set consists of  M5 x 20mm spanner headed Shanked bolts with Blue locking paste, 5mm nylock nuts and 5mm form B washers. Perfect for the Trampa deck and an important upgrade when converting your trucks over to a new Trampa deck.

The ply of the deck will determine the length of the bolt required as a 12ply Trampa deck is much thiner than a 17ply.

Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck.

M5 x 20mm Regular Hex Head Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M5 x 20mm Hex Head Bolt is made from A4 Marine Grade Stainless Steel. This Bolt is used to connect the Skate Trucks to Low Ply TRAMPA decks. We use a shorter bolt to make the Truck to deck connection neater & to stop any extruding parts which may cuase un-necessary injuries.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.  

You will need a pair of 8mm Spanners or 8mm socket on a Ratchet Drive  to tighten & loosen the Nuts & Bolts.
Ensure all your Nuts & Bolts are tight before riding!

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

This M5 x 20mm HEX HEAD BOLT KIT fixes TRAMPA Skate Trucks to 11ply HolyPro Decks only. The slightly shorter bolt avoids excessive thread exposure on thinner ply decks, improving visual appearance whilst improving safety by giving a better neater fit.

Using Marine Grade Stainless Steel for our fixings means our bolts will never rust on you! They can cope with any bad terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks which commonly turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being totally Non Corrosive all of TRAMPA's Bolts are dipped in LOCTITE THREAD LOCKING PASTE whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system. This double security ensures your Nuts & Bolts stay tight for as long as possible allowing you to stay focused & push the boundaries of your equipment with the piece of mind that nothing is going to fail on you. Use 2 x 8mm ring spanners to tighten the M5 Nut onto the M5 Bolt. Ensure all your Nuts & Bolts are nice & tight before you ride!

Weighing just 18 grams for the entire set these Nuts & Bolts are very lightweight & being made from A4 Stainless steel they also look incredibly sexy!!

M5 x 20mm HEX Head Bolt - Marine Grade Stainless steel
M5 Nut - Marine Grade Stainless steel Nylock Nut
M5 Washer Form B - Marine Grade Stainless Steel
Weight: 19g
What length Bolt Kit do you require..?
What length Bolt Kit do you require..?
M5 x 20mm Stainless Steel Hex head Skate Truck Bolt kit  - 11ply M5 x 20mm Stainless Steel Hex head Skate Truck Bolt kit - 11ply
Skate Truck Bolt kit M5 x 25mm Hex Bolt - 12-15ply Skate Truck Bolt kit M5 x 25mm Hex Bolt - 12-15ply
Quantity required:
We have enough parts to make…  
RRP £2.50 - per set

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon