TRAMPA'sM6 x 30mmCOUNTERSUNKBolt is made from A4 Marine Grade Stainless Steel. This Bolt is slightly longer than the regular bolts & is used to connect the Spring Trucks to 17ply TRAMPA decks. The head of the Bolt is COUNTERSUNK. Countersinking the head of the bolt means that when it is screwed into position it sits flush & neat with the surface it is screwed into, preventing it from standing proud & eliminating the chance of anything getting "snagged or hung-up" should it get caught on something....
Weighing just 7.3g each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.
You’ll will need a 4mm Allen key to turn this bolts. Ensure all your nuts & Bolts are tight before riding!
Introducing TRAMPA'sM6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPANuts.
This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!
The following are required to build this product:
Battery Box Dimensions 174 x 90.5 x 3mm Thick
3k Twill Carbon Fibre Battery Box TOP Panel Fits 10-12s Batteries
8-10s Carbon fibre panel for Battery Box - BOTTOM
M4 x 50mm Internally Threaded Spacer nut - Battery Boxes
M4 x 10mm Dome Headed Bolt - Marine Grade Stainless Steel
M4 x 10mm Countersunk Bolt - Marine Grade Stainless Steel
M4 Washer Form B - Marine Grade Stainless Steel
M6 x 30mm Countersunk Bolt - Marine Grade Stainless steel
M6 Nut - Marine Grade Stainless steel Nylock nut
M6 Washer Form B - Marine Grade Stainless Steel
Will fit to Will fit to Street Carvers, Urban Carvers & Mountainboards