Trampa use only the finest A4 Marine Grade stainless steel in all of their hardware which means your Trampa can be used and handle the harshest of environments...
Use an 4mm Allen or HEX key and a 10mm socket drive to tighten the nuts onto the bolts.
All bolts are dipped in Blue Glue paste to give the ultimate secure fix.
All nuts are fitted with the internationally renowned "Nylock" locking system.
The shorter bolt avoids excessive thread exposure on thinner (11/12ply) decks.
Using A2 marine grade Stainless steel to provide the finest quality nuts and bolts, this 8 piece set consists of M6 x 20mm Countersunk Allen Key headed bolt with Blue locking paste, 6mm nylock nuts and 6mm form B washers. Perfect for the Trampa deck and an important upgrade when converting your trucks over to a new Trampa deck.
By using counter sunk bolts to fit the bindings to the deck we are able to ensure a flush whilst very secure fit to the deck, giving no nasty bolt exposure on the underside of the deck allowing the rider to board slide on any suitable obstacles.
The ply of the deck will determine the length of the bolt required as a 11/12ply Trampa deck is much thiner than a 17ply.
Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck..
The following are required to build this product:
M6 x 20mm Marine grade Stainless steel Countersunk Binding Bolt kit is used to fix TRAMPA Bindings to all 11 & 12 ply TRAMPA decks. The Countersunk bolt sits flush in the under-side of the board. Use a 4mm Allen key to hold the Countersunk Bolt & a 10mm ring spanner to tighten the nut onto the bolt.
All of TRAMPA's Marine Grade Stainless Steel Boltss are dipped in Blue locking paste whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system to ensure the most secure fix possible. Ensure your nuts and bolts are nice & tight before you ride!