This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Heel Straps

Heel Straps with POLISHED Ratchets Back Straps for TRAMPA Heel Strap Bindings In Pairs Ratchet Buckle Anodised Silver Camlock Buckles fit too Footstrap & Heelstrap Bindings - BLACK 16cm (small) Ladder for Heel strap 18cm (medium) Ladder for Heel strap 20cm (longest) Ladder for Heel strap M5 x 25mm Dome head Bolt - Marine Grade Stainless steel with locking paste M5 Washer Marine Grade Stainless steel M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings Spacer for Heel strap allows straps to float freely M5 x  8mm Countersunk Bolt - Marine Grade Stainless steel with locking paste Heel Straps with BLACK RatchetsHeel Straps with BLUE RatchetsHeel Straps with BRONZE RatchetsHeel Straps with RED RatchetsHeel Straps with WHITE Ratchets
RRP
£30
inc tax

TRAMPA HEEL STRAPS lock your feet into the BINDINGS & make you feel at one with the deck. When using Heel Straps you are committed to the ride & you will have more control over the board. Most Pro riders use heel straps when MOUNTAIN BOARDING as feeling locked to the board increases confidenc, gaining greater achievments without the worry of your feett working themseves out of the bindings

With 3 pairs of different length LADDER STRAPS to choose from, the TRAMPA HEEL STRAPS will easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board. A CAMLOCK BUCKLE is used to Lock the Heel Strap on one side of your foot & a RATCHET BUCKLE on the other. The Ratchet Buckle easily tightens the Ladder into the heel straps so that your foot is LOCKED IN but COMMFORTABLE! The rider is able to adjust the strap into the correct position (relative to their foot size) & gain an easy step in – step out locking system into their bindings.

TRAMPA Heel Straps are universally fitting & very simple to fit, TRAMPA Heel Straps are supplied with a Marine Grade Stainless Steel FITTIG KIT & only take a few minutes to assemble.

Ratchet Buckle Anodised Silver

TRAMPA's RATCHET BUCKLE connects to FOOTSTRAPS & to HEEL STRAPAThe Ratchet Buckles are a fundamental component part of the BINDINGS, the RATCHET STYLE BINDINGS will not function without them. 

Ratchet Buckles are most commonly used by Mountain Board Riders looking for the tightest connection to the Deck. By simply lifting the ratchet lever up & down feeds the Ladder Strap into the Ratchet Buckle gradually tightening as it goes. You can tighten the strap as much as you comfortably like the bindings to be. To undo the Ratchet Buckle simple apply some pressure to the Release Clip and the straps should simply pull apart.

The Base of the RATCHET BUCKLE has a "Special Hook" The Hook is used to slip into a special slot, anchoring the Ratchet into the footstrap, eliminating any movement in its mounting. This locking into position ensures maximum control over your board through your bindings at all times. A Quick Release Clip, using an extra long lever makes opening the bindings really easy to do, whilst a range of colour coordinating surface protection (colour) options allows you to match up in colour to all of the TRAMPA products on sale. Use an M5x8mm Countersunk Bolt & special Marine Grade Stainless steel STAR NUT to fix the Ratchet Buckle into the Foot StrapEnsure your nuts & bolts are tight before you ride!

Camlock Buckles fit too Footstrap & Heelstrap Bindings - BLACK

The Camlock Buckle is an integral part of the Camlock Binding. Using a Marine Grade Stainless Steel M5 x 8mm Counrtersunk bolt to screw into a submerged Star Nut that is housed within the TRAMPA Ratchet style Footstraps & the TRAMPA Heelstrap Bindings. There is a spacial hook on the underneath of the CAMLOCK that positions into a special slot on the Footstrap. this special hook & Slot enables the camlock to fit very tightly, securing the ladder strap that is fed into it in the correct position whilst giving secure adjustment to the bindings to fit your foot size.

Unlike the Ratchet buckle, the Camlock will not open or close on you regardless of accidents, your bindings will remain in the same open position until the clip is un-done & the ladder is moved into a new position, this means they wont close on you even when deck lands Binding side down making them the perfect choice of binding option for Kite Boarders who potentially do soar great heights into the air whilst making board off maneuvers, inevitably the deck will get dropped, potentially on the bindings and should they close up on you like what might happen to Ratchet style bindings, (Ratchet Bindings are more suited to Mountainboarding) then this will make it very difficult to be able to get your foot back into the bindings especially when you have a huge kite in the air that you are attached to, opening up the bindings whilst the kite is dragging you around can be a real pain in the XXX, so always best to use Camlocks Bindings if you are Kiteboarding.

M5 x 25mm Dome head Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M5 x 25mm Extra Wide Dome Headed Bolt is made from A4 Marine Grade Stainless Steel. This Bolt is used to connect the TRAMPA Heel Straps to the TRAMPA Foot straps.. We use these Extra Wide Dome Headed Bolts to give a flush & comfortable fit on inside of the foot straps so that nothing interferes with your foot in anyway & therefore cause you no potential discomfort when riding.

Weighing just 2.6g each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are dipped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt. You’ll will need a 3mm Allen key to turn this bolt & Ensure all your Nuts & Bolts are tight before riding!

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

Spacer for Heel strap allows straps to float freely

This tiny Spacer fits into the Ladder Straps of the TRAMPA Heel Straps. The Spacer stops the Ladder Strap from being over tightened & also allows some movement when the ladder straps are fitted to the Binding Foot Straps.

The Spacer ensures a great fit. It avoids crushing your plastic heel straps whilst maximising comfort to your foot & ride at all times. This Spacer enables the Heel Straps to float freely whilst maximising comfort whilst giving you a responsive feeling in your Binding set up.

M5 x 8mm Countersunk Bolt - Marine Grade Stainless steel with locking paste

This M5 x 8mm COUNTERSUNK Bolt is made from A4 Marine Grade Stainless Steel & is used to secure TRAMPA RATCHET BUCKLES or tthe TRAMPA CAMLOCK BUCKLES onto the TRAMPA FOOTSTRAPS. The head of the Bolt is COUNTERSUNK so that it sits flush with your binding buckle.

Using Marine Grade Stainless Steel, means these bolts will never rust on you! Weighing just 1.8g each, they are very lightweight, look very sexy & are totally non corrosive. They can cope with any terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You’ll need 2 of the TRAMPA M5 x 8mm Countersunk Bolts to construct 1 pair of TRAMPA Bindings. You’ll also need a 3mm Allen key to tighten & loosen the bolts. Don’t forget to make sure all you’re Nuts & Bolts are tight before you ride!

TRAMPA HEEL STRAPS lock your feet into the BINDINGS & make you feel at one with the deck. When using Heel Straps you are committed to the ride & you will have more control over the board. Most Pro riders use heel straps when MOUNTAIN BOARDING as feeling locked to the board increases confidenc, gaining greater achievments without the worry of your feett working themseves out of the bindings

With 3 pairs of different length LADDER STRAPS to choose from, the TRAMPA HEEL STRAPS will easily adjust to fit to any sized shoe that comfortably fits onto a Mountain Board. A CAMLOCK BUCKLE is used to Lock the Heel Strap on one side of your foot & a RATCHET BUCKLE on the other. The Ratchet Buckle easily tightens the Ladder into the heel straps so that your foot is LOCKED IN but COMMFORTABLE! The rider is able to adjust the strap into the correct position (relative to their foot size) & gain an easy step in – step out locking system into their bindings.

TRAMPA Heel Straps are universally fitting & very simple to fit, TRAMPA Heel Straps are supplied with a Marine Grade Stainless Steel FITTIG KIT & only take a few minutes to assemble.

Back Straps for TRAMPA Heel Strap Bindings (Pair)
Anodised Silver Ratchet buckle with locking hook
Black Camlock Buckle with Locking Hook
Heel-strap Ladder Straps 16cm x 2
Heel-strap Ladder Straps 18cm x 2
Heel-strap Ladder Straps 20cm x 2
M5 x 25mm Dome head Bolt - Marine Grade Stainless steel
M5 Washer Form B - Marine Grade Stainless Steel
M5 Nut - Marine Grade Stainless steel Nylock Nut
Spacer for Heel strap allows straps to float freely
M5 x 8mm Countersunk Bolt - Marine Grade Stainless steel
Weight: 284g
What colour Ratchert Buckles do you want?
What colour Ratchert Buckles do you want?
Heel Straps with POLISHED Ratchets Heel Straps with POLISHED Ratchets
Heel Straps with BLACK Ratchets Heel Straps with BLACK Ratchets
Heel Straps with BLUE Ratchets Heel Straps with BLUE Ratchets
Heel Straps with BRONZE Ratchets Heel Straps with BRONZE Ratchets
Heel Straps with RED Ratchets Heel Straps with RED Ratchets
Heel Straps with WHITE Ratchets Heel Straps with WHITE Ratchets
What colour Camlock's do you want ?
What colour Camlock's do you want ?
Black Camlocks Black Camlocks
Blue Camlocks Blue Camlocks
Red Camlocks Red Camlocks
Camlocks White Camlocks White
Do you want some 1/2 priced Bolts to fix your Bindings to the deck??
Do you want some 1/2 priced Bolts to fix your Bindings to the deck??
Yes please - I need a Binding bolt kit (+£2.50)
NO Thanks
Quantity required:
We have enough parts to make…  
RRP £30 - per set

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
Approx. shipping price:

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon