This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

INFINITY URBAN Carveboard with 9.525mm SOLID Steel axles on 6 or 7 Inch Inch pneumatic HYPA Wheels

INFINITY URBAN Carveboard with 9.525mm SOLID Steel axles on 6 or 7 Inch Inch pneumatic HYPA Wheels INFINITY URBAN Carveboard with 9.525mm SOLID Steel axles on 6 or 7 Inch Inch pneumatic HYPA Wheels 35° SOLID TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit Mini INFINITY TRUCKS - SOLID Forged Channel Hanger with 9.525mm SOLID Steel Axles Solid Baseplate Nickle plated Kingpin Build your own Custom 7 Inch HYPA Wheel ! 9.525mm Bearings - 9.55mm x 28mm (3/8ths UNC imperial) axle ABEC 5 rated RED x 8
RRP
£400
inc tax
schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...

35° SOLID TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit

The 35° TRAMPA Carve deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks, tightens the steering incredibly, turning the deck one of the fastest, most stable decks on the market!

The 35° TRAMPA Carve deck can be assembled as any of the Carve Deck options in the TRAMPA product range (Street Carve, Urban Carve, Gummies Carve) & is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Carve deck is only supplied as Drilled, Edged & Sanded, its Fully Gripped & supplied with a Countersunk Marine Grade Stainless Steel Bolt Kit to fix the Trucks to the Deck!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

Mini INFINITY TRAMPA TRUCKS - SOLID Forged Channel Hanger with 9.525mm SOLID Steel Axles Solid Baseplate Nickle plated Kingpin

The entire CARVE TRUCK Range is without doubt the sweetest most advanced steering system ever to be created! CARVE TRUCK's are also totally amazing! The Hanger is reversible & it can be assembled to make two entirely different Trucks in one! They can be fitted with either the 83 & 90mm Stickies Longboard wheels for STREET CARVE use & for URBAN CARVE they can be assembled to any of the amazing 7 inch HYPA or SUPERSTAR wheels, using Urban Treads, Gummies or any other 7 Inch tyre on the website!

Amazingly the Hanger is reversible... The Axle is positioned offset in the hanger, NOT Centrally located... This means when we assemble the Truck, depending on what we are assembling it for (The Carve Truck will assemble to fit to either Street or Urban Carve Decks) will depend on which way around we assemble the hanger.. The hanger faces forwards (Same as mountainboard) for the URBAN Carve Deck assembly making the overall wheel base longer & the ride height as low as possible to accept the larger sized wheels that lift the deck height back up & by increasing the wheel base gives the extra space to fit the larger wheels at the ends. Setting up the deck for the Street Carve we turn the hanger 180º so it faces inwards (Axles to the inside) shortening the wheel base, raising the ride height to a more acceptable position to be able to accommodate the smaller sized 83 & 90mm Longboard wheels.

The Carve Truck has 'Dual Spring Positions'. Having Dual Spring positions means the rider has even more tune-ability than what they can shake a stick at! The rider can adjust & custom tune their steering range to just about any setting for any kind of terrain or ride type they can imagine.... It is possible to 'move the springs into the inside position', making the steering easy to turn & super loose, making the performance perfect for incredibly sexy CARVY TURNS.... Alternatively if your not in that mood or Carvy turns is not your thing try moving the springs 'into the outside position' & then 'Adding TRAMPA DAMPA's into the springs' before inserting into the truck, thus making the steering as STIFF as you could ever imagine, setting you up perfectly for the fastest of high speed runs when & where ever possible....!

The INFINITY CARVE TRUCK has not been CNC'd for light weight, it is therefore full fat & of course full strength! The CNC Machine has only been used to precision drill the Kingpin Holes to ensure the connection between the Hanger & Baseplate are exact. So as it's name suggests, the INFINITY CARVE TRUCK has been designed to last forever!! The precision milled CNC holes allow the Truck to assemble like a dream - everything fixes together perfectly enabling the INFINITY CARVE TRUCK to provide problem free, precision riding for forever!

TRAMPA's Carve Boards range is the perfect all round deck aimed at Snowboarders, Surfers, Skaters, Longboarders & of course Mountainboarders wanting to cross over to ride the non seasonal Tarmac.... :-)

Build your own Custom 7 Inch HYPA Wheel !

TRAMPA's 170mm x 45mm - 7 Inch wheels are the primary choice sized wheel for many inventors developing sporting equipment requiring very strong whilst very light weight, small pneumatic wheels for their applications to work correctly. Mountainboards, Kiteboards, 2Wheel, Dirt-Scooters, Bikes Skates, Sledges, Trikes, Skikes, Model Planes, Single Seater Planes, Dog Sledding, Dirt Skiing, Transportation Chariots & now lots of exciting electronic applications all due to come to the market very soon, all require an 8 inch wheel for their best movement... If you have a wheeled project on the go & you would like to fit TRAMPA's 8 inch wheels onto it, then in your design you need to use a 12mm axle & you will need to give an axle mounting space of 34.2mm in order to fit the TRAMPA Hubs correctly.

The 6 Spoke HYPA Wheel 
is the lightest & strongest plastic injected 7 & 8 inch Hub / Wheel on the market today! Its produced using original DuPont ingredients & the best Injection Moulding machinery, no quality expense is spared during the production of this amazingly strong little hub!

During testing the HYPA Wheels performance surpassed all expectations. :-) This little 8 inch wheel proved to be so strong, when the "Crash Test Dummies" (i mean the Mountainboard Team Riders) inflated their tyres well beyond factory recommendations! (Tut-Tut Naughty-Naughty!) The extra inflation resulted in substantially faster roll speeds, giving them the extra time in the air to complete their huge freestyle moves & still have time land in 1 piece! I'm pleased to tell you there were no explosions from the over inflation to report whilst breaking a HYPA HUB is just about unheard of, something extraordinary has to go wrong before these hubs do! If you have seen some of the crazy stuff the MTB & KTB teams have put the equipment through over the years, with genuinely almost no problems to report, you will have no doubt of the HYPA WHEELS performance capabilities.

HYPA Hubs are available in loads of coordinating colour combinations its difficult to make the decision as to which option you like the most! You can choose from naked Matt Black or White to Painted Gloss Red or Gloss Blue with Painted Black or White TRAMPA Logo's or Printed in Winter or Army Camo, the choice is all yours... :-)

TRAMPA's HYPA hubs are held together using Marine Grade (A4) Stainless steel Nuts & Bolts that will never rust on you. Our bolts are perfect for bad conditions. Not only will the nuts & Bolts never rust on you all the Bolts used by TRAMPA have been dipped in a special Blue Locking Paste, whilst all the Nuts that TRAMPA uses are fitted with the world renowned Nyloc nylon nut locking system, all of these no expense spared small details ensure you get the absolute best product possible! To help prevent you from purchasing imitations, TRAMPA's HYPA Hubs are always TRAMPA embossed between the spokes proving our top quality! 

Currently, we only have the INLINE tyre tread in the 7 inch Tyres.  This makes them perfect for hard packed surfaces from asphalt to Tarmac and suitable for all kinds of creations from Junior sized Mountainboards to fast Pumpy Dirt Scooter tyres in the skate park.... 

TRAMPA’s very own & genuine ABEC 5 rated Bearings, push perfectly into the 'Centre Set' bearing housings either side of the hub. The bearings are held in position internally by use of a 'Bearing Support Spacer' sitting on the axle in the middle of the hub guaranteeing the smoothest spin rate possible. TRAMPA's Bearings will fit onto 9.525mm, 10mm & 12mm Axles. 9.525mm is the same as USA Imperial measurement 3/8ths of an inch, AKA '10mm Bearings'. Bearing Reducer Sleeves downsize your 12mm Bearings to fit onto 10mm Metric Scooter Axles or 9.525mm (3/8ths of an inch) Imperial Skate Axles. Bearings can be supplied at 50% of the usual retail price when purchased with a wheel... 2x Bearings cost just £2.50 per pair (usually £2.50 each), resulting in a £10 saving per set of 8x bearings, 8 bearings are enough for a set of 4 wheels!

The 35° TRAMPA Carve deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks, tightens READ MORE...

Complete Deck Weight

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
Component Weight 3,268g 3,268g 3,268g
Complete Deck Weight 5.6 kg 5.8 kg 5.9 kg

Component Weights

Mini INFINITY TRUCKS - SOLID Hanger & 9.525mm SOLID Steel Axles1,651g
Build your own Custom 7 Inch HYPA or SUPERSTAR Wheel !1,440g
URBAN Carveboard Bearings - 9.525mm Axle177g
Total component weight3,268g
Mini INFINITY TRAMPA TRUCKS - SOLID Forged Channel Hanger with 9.525mm SOLID Steel Axles Solid Baseplate Nickle plated Kingpin
Build your own Custom 7 Inch HYPA Wheel !
35° SOLID TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit

Blank deck weight chart

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
General Flex Rating firm stiff very stiff
What Ply deck do you require...?
What Ply deck do you require...?
14ply SOLID Carve - FIRM 14ply SOLID Carve - FIRM
15ply SOLID Carve - STIFF 15ply SOLID Carve - STIFF
16ply SOLID Carve - STIFFEST  16ply SOLID Carve - STIFFEST
14ply HOLYPRO Carve - FIRM (+£25) 14ply HOLYPRO Carve - FIRM (+£25)
15ply HOLYPRO Carve - STIFF (+£25) 15ply HOLYPRO Carve - STIFF (+£25)
16ply HOLYPRO Carve - STIFFEST (+£25) 16ply HOLYPRO Carve - STIFFEST (+£25)
What colour Baseplate do you require...
What colour Baseplate do you require...
BLACK INFINITY Baseplate BLACK INFINITY Baseplate
SILVER INFINITY Baseplate SILVER INFINITY Baseplate
Add some colour to your Springs?
Add some colour to your Springs?
No - SILVER Springs cool for me :-) No - SILVER Springs cool for me :-)
BLACK Powder Coated Springs (+£5) BLACK Powder Coated Springs (+£5)
BLUE Powder Coated Springs (+£5) BLUE Powder Coated Springs (+£5)
RED Powder Coated Springs (+£5) RED Powder Coated Springs (+£5)
WHITE Powder Coated Springs (+£5) WHITE Powder Coated Springs (+£5)
Stiffen the steering & add some DAMPAs
Stiffen the steering & add some DAMPAs
NO Dampa's Thanks, I want to carve! :-)
YELLOW DAMPA's Easy (+£7.50) YELLOW DAMPA's Easy (+£7.50)
GREEN DAMPA's Firm (+£7.50) GREEN DAMPA's Firm (+£7.50)
RED DAMPA's Stiff (+£7.50) RED DAMPA's Stiff (+£7.50)
BLUE DAMPA's Very Stiff (+£7.50) BLUE DAMPA's Very Stiff (+£7.50)
WHITE DAMPA's Stiffest (+£7.50) WHITE DAMPA's Stiffest (+£7.50)
Do you want HYPA or SUPERSTAR hubs?
Do you want HYPA or SUPERSTAR hubs?
6 Spoke HYPA Hubs
5 Spoke SUPERSTAR Hubs (+£30)
Which colour Bearings do you want?
Which colour Bearings do you want?
RED 9.525 x 28mm Bearings RED 9.525 x 28mm Bearings
BLACK 12x28mm Bearings & 9.525mm Reducers (+£2.50) BLACK 12x28mm Bearings & 9.525mm Reducers (+£2.50)
RED 12x28mm Bearings & 9.525mm Reducers (+£2.50) RED 12x28mm Bearings & 9.525mm Reducers (+£2.50)
BLUE 12x28mm Bearings & 9.525mm Reducers (+£2.50) BLUE 12x28mm Bearings & 9.525mm Reducers (+£2.50)
Need a Bag to store your board in?
Need a Bag to store your board in?
Muck Off Bag - 20% Discounted! (+£16) Muck Off Bag - 20% Discounted! (+£16)
Luxury Travel Bag - 20% Discounted! (+£56) Luxury Travel Bag - 20% Discounted! (+£56)
Muck Off & Travel Bag - 25% Discounted! (+£67.50) Muck Off & Travel Bag - 25% Discounted! (+£67.50)
NO Bags Thanks
Thinking of fitting some Bindings?
Thinking of fitting some Bindings?
Please drill for Bindings :-)(+£2.50) Please drill for Bindings :-)(+£2.50)
N0 Binding Drillage Thanks
Quantity required:
We have enough parts to make…  
RRP £400 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
Approx. shipping price:

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon