Trampa use only the finest A4 Marine Grade stainless steel in all of their hardware which means your Trampa can be used in and handle the harshest of environments... Use an 3mm Allen (or HEX key) and 7mm socket drive too tighten the nuts onto the bolts. All bolts are dipped in Blue Glue paste to give the ultimate secure fix. All nuts are fitted with the internationally renowned "Nylock" locking system. As expected with TRAMPA only the best fixings will do.... These M4 x 40mm Socket cap bolts are made from Marine Grade Stainless steel and for an extra quality touch brushed with blue glue paste so that when they are fixed together with the correct M4 Nylock nut, they have the best fix there is on the market. Attention to small details is the beauty of Trampa.... Using A2 marine grade Stainless steel to provide the finest quality nuts and bolts, this 6 piece set consists of M4 x 35mm Socket cap, allun key headed bolt with Blue locking paste and 4mm nylock nuts . Used for constructing the Trampa Hypa hubs together. Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck.a corrosion free, strong and the perfect neat fitting.
The following are required to build this product:
This M4 x 40mm Socket Capped Bolt Kit is used specifically for constructing TRAMPA SUPERSTAR hubs. Marine Grade Stainless steel Socket capped bolts fit absolutely perfectly! All TRAMPA bolts are Dipped in Blue Locking Paste whilst all of the M4 Nuts have been fitted with the world renowned 'Nylock' locking system to ensure the most secure fix possible. Using a 3mm Allen Key to turn, screw the M4 x 40mm bolt through the Superstar spokes connecting them to the hub. When the Bolt exposes itself on the other side of the Hub use your hand to slip the M4 Nut. Then, using a 7mm ratchet spanner to turn the nut and a 3mm Allen key to hold the bolt, tighten the M4 nuts evenly onto the M4 Bolts. Ensure all your nuts & bolts are tight before you ride!