This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

M5 x 25mm Marne Grade Stainless Steel SKATE Truck Bolt kit - 12/15ply Decks BK02

M5 x 25mm Marne Grade Stainless Steel SKATE Truck Bolt kit - 12/15ply Decks BK02 M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel with locking paste M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings M4 Washer Marine Grade Stainless steel
RRP
£2.50+

This M5 x 25mm HEX HEAD BOLT KIT is used to fix TRAMPA Skate Trucks & TRAMPA Spring Trucks to Regular Ply (12-16ply) TRAMPA Decks. The correct sized bolt avoids excessive thread exposure on thinner ply decks, improving visual appearance by giving a better fit.

Using Marine Grade Stainless Steel for our fixings means these bolts will never rust on you! They can cope with any bad terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks which commonly turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being totally Non Corrosive all of TRAMPA's Bolts are dipped in ENGINEERS BLUE THREAD LOCKING PASTE whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system. This double security ensures the Nuts & Bolts stay tight for as long as possible allowing you to stay focused & push the boundaries of your equipment with the piece of mind that nothing is going to fail on you. Use 2 x 8mm ring spanners to tighten the M5 Nut onto the M5 Bolt. Ensure all your Nuts & Bolts are nice & tight before you ride!

Weighing just 18 grams for the entire set these Nuts & Bolts are very lightweight & being made from A4 Stainless steel they also look incredibly sexy!!

The Bolts have a 9mm shank (smooth side, no thread) which means the section of the bolt which passes through the Trampa deck has smooth sides. This eliminates any chance of abrasion or wearing from the thread of the bolt on the internals of the deck, giving extra life to the deck....

The ply of the deck will determine the length of the bolt required as a 12ply Trampa deck is much thiner than a 17ply.

Trampa's stainless bolt range ensures a durable, strong and the perfectly neat finish to your deck.

M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel with locking paste

Made from A4 Marine Grade Stainless Steel, all of the nuts, bolts & screws used in a TRAMPA board have proven to be up to the challenge of holding everything together. Using Marine Grade Stainless Steel also means these Bolts will never rust on you! They can cope with the harshest of weather conditions & will laugh in the face of sandy/salty beaches or muddy freeride tracks - which can turn other manufacturers’ nuts & bolts into corroded rusting wrecks!

Wherever possible, we dip all our bolts into BLUE THREAD LOCKING PASTE, to ensure an extra strong & secure fix between the nuts & bolts.

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

This M5 x 25mm Marine Grade Stainless Steel HEX HEAD BOLT KIT is used to fix TRAMPA Skate Trucks & TRAMPA Spring Trucks to Regular Ply (12-16ply) TRAMPA Decks. The correct sized bolt avoids excessive thread exposure on thinner ply decks whilst improving visual appearance by giving a better fit.

Using Marine Grade Stainless Steel for our fixings means these bolts will never rust on you! They can cope with any bad terrain or weather. They laugh in the face of sandy/salty beaches & muddy freeride tracks which commonly turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being totally Non Corrosive all of TRAMPA's Bolts are dipped in ENGINEERS BLUE THREAD LOCKING PASTE whilst all of the Nuts have been fitted with the world renowned 'Nylock' locking system. This double security ensures the Nuts & Bolts stay tight for as long as possible allowing you to stay focused & push the boundaries of your equipment with the piece of mind that nothing is going to fail on you. Use 2 x 8mm ring spanners to tighten the M5 Nut onto the M5 Bolt. Ensure all your Nuts & Bolts are nice & tight before you ride!

Weighing just 18 grams for the entire set these Nuts & Bolts are very lightweight & being made from A4 Stainless steel they also look incredibly sexy!!

4x M5 x 25mm HEX Head SHANKED Bolt - Marine Grade Stainless steel
4x M5 Nut - Marine Grade Stainless steel Nylock Nut
4x M4 Washer Form B - Marine Grade Stainless Steel
Weight: 36g
Quantity required:
RRP £2.50 - per set

Excluding VAT
HCC: 8714929000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon