35° short Kiteboard Blank deck

• Deck length: 888 mm
• Deck width: 228 mm
• Riser height: 25 mm
• Riser angle: 35 degrees
• Crease to crease length: 690 mm
• Crease to tip length: 0 mm
• Axle to axle (wheel base length): 888 mm
• Ply: 12 13 14 15
• No Truck mounting holes means you can drill your trucks where you like, good choice if customising your deck shape
• No holes for your bindings, good choice if you like your bindings in a custom poistion
• Perfect deck for you should you wish to make modifications to the shape...

Product Details

The Trampa 35° short has been developed for smaller riders and freestyle riders of all kinds. 

It fits to all spring steer truck systems, and is particularilly well suited on on Scrub channel, Mbs Matrix and kitedeck revolution.

Being short in overall length, this deck is excellent for huge airs, fast rotations and all freestyle use

Kiteboarders tend to like shorter decks with more flex than mountainboarders, and the shape of this deck allows for this.

As you can see, the deck has been 'Boned'. This allows for slightly more flex in the centre of the deck, creating a very floaty but still very poppy feel...

The TRAMPA™ deck is made from a re-inforced glass and plastic thermo composite, which was originally developed for light-weight millitary purposes, giving superior strength to weight ratios. It is able to with stand huge impacts or forces and flex's like most other materials cant.

It is specially formulated, and presented in a workable matter in a thread like format, just like cotton. From there, we weave the thread to our desired width, and place it onto a roll.

Polished and pre shaped alluminium moulds are used to give the material the dimensions and the top surface finish we require.

By varying the layer quantity used, we are able to control the amount of flex and pop in the deck, allowing us to custom make the deck for the customers height weight, style, rider type and riders abillity.

A special seal is used to help with the large pump to create  a high pressured vaccume. The mould  is then placed in the oven, still under a vaccume, to cook, just like a cake. At this point ee refer to the resulting product as the Motherboard.

Once cooked the exterior moulds are removed and the motherboard is taken to the water jet cutting bed to neatly remove the individual decks from the motherboard. The datum marks are fed into the machine for accuracy and water is mixed with a very fine particle sand which is then blasted out of  the nozzell under a pressure of 60,000 Psi. (thats enough pressure to cut through 9 inch titanium!) which results in a razor sharp finish to the edge of the deck.

The decks then need to be finished by hand... A jig is used to drill the truck holes, and the binding and grab handle fixing holes are measured and drilled by hand. Metal files are used to take away the sharp edge of the deck and they are then rubbed smooth with a block and various types sandpaper. The finer the sandpaper used the finer the finish to the edge of the deck will be.... spend some time on your deck, show it some love and give it a good rub.....

We can make the TRAMPA™ decks as stiff or as flexi as you would want it to be. Generally speaking the stiffer the deck is the heavier the rider is, so the weight of a Trampa deck is often relative to the weight of the rider, so lightweight isnt always the best thing as its important for the rider to know that their deck can handle their weight for the right applications.....

All TRAMPA™ blank decks are available drilled or undrilled , with or without grip tape, with or without converting nuts and bolts or any other extras you may need.

New to the range, we have just launched an advanced grip tape, known as "Trampa Tread". Originally developed for the decking of yachts and other water craft, it is deep grooved and offers superior grip compared to regular grip tape. Excellent for all conditions especially the beach. This can be fitted at the factory when ordering.

Shipping cost guide

Our shipping charges depend on the TOTAL weight of your order, and WHERE the order is being delivered to.

You will see the exact cost of shipping for your order during the checkout process.

Below is a shipping guide price for this item

UK - £ 10.00

Europe - £ 15.00

USA - $0.00

Rest of World - £ 20.00

Download the European Road Shipping chart
Download the Worldwide Air Shipping chart

Exchange Rates

Prices shown in currencies other than GBP are estimates. All purchases are made in GBP.

The actual amount you pay in your local currency will depend on the exchange rate used by your bank.

When the Trampaboards website displays prices in US dollars, UK VAT is not included in the display price saving the customer 15% from the cost of the purchase.

Please be aware that import taxes maybe applicable when entering our country of residence

When displaying prices in Euros and USD we are currently using the following exchange rates:

£1 = €1.21159995

£1 = $1.54999995

For a full list of exchanges rate please read our exchange rates page.

Product Components