This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

Superstar 8 inch wheel - Red Gloss Rim with Gunmetal Anodised spokes & TRAMPA TREAD 8 Inch Tyres

Superstar 8 inch wheel - Red Gloss Rim with Gunmetal Anodised spokes & TRAMPA TREAD 8 Inch Tyres SUPERSTAR Hub 3.75 x 2 Inch - Red Gloss & Black logo Rim with Gunmetal anodised Spokes & Marine Grade Stainless Steel Bolt kit TRAMPA TREADS 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs Superstar 8 inch wheel - Red Gloss Rim with Gunmetal Anodised spokes & TRAMPA TREAD 8 Inch Tyres 8 Inch Re-enforced Inner Tube made by INNOVA - 200x50mm
RRP FROM
£45+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

TRAMPA's SUPERSTAR wheel is a beautiful & technically designed masterpiece, created for those who insist on fitting only the finest of equipment.

The split Rim of the SUPERSTAR hub has been manufactured using original DuPont & the very latest in precision injection molding machinary (only the best will do!), whilst the Extruded Aluminum Spokes are T6 Heat-treated (T6 heat treating makes the extruded aluminum exceptionally strong), Anodised & finally CNC precision milled to fit the TRAMPA Bearings perfectly. 

Separated & supported by a chunky nylon Spoke Support Spacer, the Heat-treated spokes simply push into the rim during assembly. The SUPERSTARS construction is held together with Marine Grade Stainless steel fixings  M4x40mm. This incredible top quality combination makes all the difference to the user compared to the competition as the SUPERSTAR hub will not fail on you. It can handle incredibly high inflation pressures.... It is what we believe to be the best/strongest 3.75 Inch hub on the market today!

The SUPERSTAR wheel is available in hundreds of different Rim, Spoke & 8 Inch Tyre colour combinations, its difficult to choose your favorite, but you can have your SUPERSTAR wheels with 8 inch tyres in any combination you like...

Constructed (as expected from TRAMPA) using only the finest fixings available which means all TRAMPA parts, including these wheels, are constructed using Marine grade Stainless steel that have all been brushed with Blue locking paste to ensure the most secure of fixings. All Nuts used also have a Nylock sleeve to ensure double quality & effective secure fixing! A 3mm Alan Key & a 7mm spanner are all the tools you need to construct or service your hubs.

Trampa’s own top quality steel Bearings, genuine ABEC 5 rated, fit perfectly into the CNC precision milled spokes, preventing any wobble & enabling the hub the fastest spin rate possible. When purchasing bearings with the hubs the bearings can be purchased for as little as £1.25 each making a £5 saving per set of 8.

Along with many other wheeled applications, the SUPERSTAR hub will fit to ALL other brands of mountainboards on the market including MBS SCRUB & KHEO. Basically the SUPERSTAR wheels will fit to anything with a 9.52mm (imperial), 10mm or 12mm axle. There are conversion spacers available for you to convert your existing 12mm bearings to work on 9.55mm skate axles (7/16ths Imperial) or 10mm (metric) scooter axles (see associated parts for details).

Due to the fantastic design & the use of top quality materials in these hubs, the finished product has ended up being exceptionally strong. This extra strength allows the rider to inflate their tyres well beyond normal recommended pressures, which in turn increases the top end roll speeds. We shouldn’t go recommending that you go over inflating your tires but if you are ever going to do it you will be safe in the knowledge that these hubs can handle the pressure that other hubs cant. During testing it was common for our Crash Test Dummis (I mean Trampa Team riders) to inflate as high as 100psi, and in some cases (Joel!) well beyond!!

M4 x 40mm Socket Capped Allen-Key Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR CONNECTING:  

SUPERSTAR HUBS       
MEGASTAR HUBS       
PHATLADS HUBS

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

8 Inch Inner Tube INNOVA 8x2 inch 200x50mm - fits 3.75 inch Rims & 8 inch tyres

INNOVA's Re-enforced 8 Inch inner tube measures 200mm x 50mm and will fit into all the of the 8 inch Tyres on the website. INNOVA's 8 Inch Inner Tube also fits into the tyres of all other brands measuring 8 Inches inflated.

Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but this INNOVA Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is the ideal tube for heavier or Pro Riders seeking to achieve higher than recommended inflation pressures...

This INNOVA Inner tube will fit into all known 8 inch tyres as well as most ATB hubs on the market. It comes as expected with an anti dust valve cap! Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

Genuine SUPERSTAR CENTER-SET Rim 3.75x 2 Inch fits all 3.75 Inch Tyres - RED with BLACK logo

TRAMPA's SUPERSTAR Hub is a technically designed super-strength masterpiece of circular lushness & has been created for those who insist on fitting only the very best equipment! SUPERSTAR Hubs are available in loads of different Rim & Spoke colour combinations, its almost impossible to decide the combination you like the most!

The SUPERSTAR hub handles the highest inflation pressures on the market, which in turn increases roll speeds giving the rider the advantage over the competition, making them perfect for the best riders, i mean the insane! SUPERSTAR Rims are produced using original 'DuPont' materials (the best), whilst the STAR SPOKES are made using a custom made mould to give us an Extruded Aluminum profile that gets T6 Heat treated (Super Strength Aero-grade quality) & then sliced to requirement.

The SUPERSTAR Hub/wheel is fully constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with any tyre that TRAMPA offers up to 8 inches in size!

Disk Brakes for steep free-ride riding & Drive Gears for Electric boards or Electric motors can also be fitted to these amazing SUPERSTAR wheels... 

Bearings can be purchased at a discounted price when purchased with complete Hubs or wheels.

GUNMETAL Anodised CLASSIC 5 SPOKE - Extruded T6 Aluminum Heat treated & CNC Precision milled fits all SUPERSTAR & MEGASTAR Wheels

TRAMPA SPOKES fit all SUPERSTAR & MEGASTAR Hubs. TRAMPA's Spokes are produced using the finest 6061 'Aero-Grade' Aluminum, which to maximise strength & performance are produced with the use of an Extrusion Die, which means TRAMPA spokes are made in one continuous piece before being sliced like bread to the required thickness. Before being sliced the extruded profile is T6 Heat Treated making the resulting Alloy extremely strong

Once sliced the Raw Spokes are sent to the CNC machine to mill out the bearing housing perfectly. Before being anodised the spokes are bead polished which not only gives a top quality finish but also removes all & any sharp edges, then finally sent away to the Anodisers to have the relevant striking colours added for top surface protection.

Check your spoke support spacers, O-Rings and hardware are in good condition when changing spokes & ensure all of your nuts & bolts are tight before you ride!

CUSTOM Spoke Support spacer - Installing a Spoke Support Conversin Spacer allowsyou to fit SUPERSTAR or MEGASTAR hubs to 9.525mm & 8mm Axles such as Evolve, Boosted & many others

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

TRAMPA TREADS 8 Inch Tyre measure 3.75x 2x 8 Inch or 200x50mm with 3.75 inch Rim fits all 3.75 inch Hubs

TRAMPA TREAD's Tyres are something special! Using an Intelligent tread pattern incorporating GRIP on GRIP! TRAMPA TREAD's are available in 2 different rubber compounds (Hard & SOFT) & suitable for nearly every application of Mountain Board riding, TRAMPA TREADS Tyres are frequently used by the team riders & will rarely let you down! 

SOFT compound TRAMPA Treads are lighter in weight & grippier than the HARD compound TRAMPA Treads, but the Soft compound Tyre will not last as long as the hard compound tyre, whilst the HARD compound tyre will not offer as much grip as the soft tyre on the hard surfaces, it is amazing on soft surfaces at digging in for grip & much more durable & long lasting on hard surfaces than the soft compound.        

Measuring 3.75 Inches at the rim, the 8 inch TRAMPA TREAD's Tyres will fit to all of TRAMPA's 3.75x 2 Inch Hubs as exact an fit, but they will also stretch & fit to the 3.75/4x 2.5 Inch Hubs. When fitting the 2 Inch wide Tyres to the 2.5 Inch Rims the wider hub gives the tyres a stretched & a lower profile appearance, consequently more surface area.... Some guys really like to do this.... Stretching the tyre also reduces the overall diameter of the inflated tyre effectively reducing your final Drive Gearing ratio to give you more acceleration, but less top speed.....

Moulded into the Rim of the Tyre is a 3.75 Inch STEEL BAND. Using a relatively regular TPI the tyre is stitched together giving a solid, inflatable structure. The recommended tyre pressure set by the factory is 50psi, this will inflate the tyre to have maximum a dimension of 200x50mm (8 x 2 inch). TRAMPA TREADS tyre will fit to all other 8 Inch wheeled Mountainboard & Kite-Landboards currently on the market.!

The TRAMPA HUBS are so strong that top riders have been known to inflate these tyres well beyond their recommended pressures with no problems to mention. However, over-inflating your tyres may cause your tyres to explode & cause you serious injury. If you do decide to go beyond the max inflation pressure make sure your nuts & bolts are tight & deflate to a regular pressure after use.

Its true, the more you inflate your Tyres the faster you will roll! It also true that if you inflate your tyres too high or too low you will also wear out your tyres much faster. The official maximum inflation pressure set by the factory for the TRAMPA TREAD's 8 Inch Tyre is 50psi, but the TRAMPA TREAD's Tyres are made so well & the TRAMPA Hubs are so strong (The tyres are only as strong as the hubs they are fitted too & our hubs are incredibly strong) that our Crash test Dummies (I mean Team Riders) have been known to inflate these Tyres well beyond their recommended pressures with no problems to mention. Its also true that over inflating your tyres may lead to an explosion which could seriously injure you, so use a pressure gauge if your going to inflate them high so you don't go too far. If you do decide to go beyond the max inflation pressure ensure your nuts & bolts are tight before inflation & once your done riding at the high pressure deflate them back down to a regular pressure, HOWEVER, through years of testing & under mutual agreement with the team, depending on how you ride & how much you weigh & what surfaces your mostly riding, we recommend you should look to inflate these tyres to somewhere between 25 & 35 psi for optimal use.

TRAMPA's SUPERSTAR Wheel is a technically designed super strengthened masterpiece of circular lushness! It is created for those who insist on fitting only the very best equipment! The SUPERSTAR handles the highest inflation pressures of any 8 inch wheel on the market, increasing roll speeds, making them perfect for the insane! SUPERSTAR Hubs are available in loads of different Rim & Spoke combinations its difficult to decide the combination you like the most!

Top Quality Plastic Injection machinery & original DuPont materials (DuPont are the Best) are used to create the high-tech Rim, whilst the Spokes use Extruded 6061 Aluminum that's been T6 Heat treated (Super Strengthened Aero-grade quality) which is all constructed using A4 (Marine Grade) Stainless Steel Nuts & Bolts. Total & absolute product perfection!

SUPERSTAR Hubs are compatible with all known 8 inch tyres on the marke! Disk Brakes & Drive Gears for Electric motors can also be fitted to these amazing SUPERSTAR wheels... Watch this space for Hot NEWS on E-TRAMPA...  Bearings can be purchased at a discounted price when purchased with a wheel. 2x Bearings cost only £2.50 = £10 per set of 8 making a £10 saving per set!

TRAMPA's 8 Inch wheels now come with a few options but is predominantly tuned to give MAX efficiency when connected in the Motor Setup of a TRAMPA Electric decks, using a 14 tooth Motor Pulley accompanied with an 66 Tooth Slave Pulley. This combination is best all round gearing when using TRAMPA Electric MountainBoards - 
 
--------------------------------------

5 Spoke, 8 Inch tyre sized Wheels can also fit the 76 Tooth Pulleys... Fitting the 76 Tooth pulleys increases the Torque & Acceleration of the board incredibly, but also trims off your top speed as consequence...
 
--------------------------------------

1x SUPERSTAR CS Rim 3.75 x 2 - RED with BLACK logo
2x CLASSIC 5 Spoke - GUNMETAL
1x CUSTOM Spoke Support spacer
5x M4 x 40 Socket Cap Allen-Key Stainless Steel Bolt
5x M4 Nut - Marine Grade Stainless steel Nylock Nut
1x TRAMPA TREADS 8 Inch Tyre - 3.75x 2x 8
1x 8 Inch Inner Tube - INNOVA
Inflated Wheel Diameter 8in
Inflated Wheel Width 2in
Recommended Tyre Inflation 50psi
Weight: 505g
Please Select - What colour SUPERSTAR Rim would you like?
Please Select - What colour SUPERSTAR Rim would you like?

Matt BLACK SUPERSTAR Rim
Matt BLACK SUPERSTAR Rim

BLUE n BLACK SUPERSTAR Rim (+£2.50)
BLUE n BLACK SUPERSTAR Rim (+£2.50)

BLUE n WHITE SUPERSTAR Rim (+£2.50)
BLUE n WHITE SUPERSTAR Rim (+£2.50)

CARBON FIBER Print SUPERSTAR Rim (+£2.50)
CARBON FIBER Print SUPERSTAR Rim (+£2.50)

CHROME SUPERSTAR Rim (+£2.50)
CHROME SUPERSTAR Rim (+£2.50)

GREEN SUPERSTAR Rim (+£2.50)
GREEN SUPERSTAR Rim (+£2.50)

PINK SUPERSTAR Rim (+£2.50)
PINK SUPERSTAR Rim (+£2.50)

PURPLE SUPERSTAR Rim (+£2.50)
PURPLE SUPERSTAR Rim (+£2.50)

RED n BLACK logo SUPERSTAR Rim (+£2.50)
RED n BLACK logo SUPERSTAR Rim (+£2.50)

RED n WHITE SUPERSTAR Rim (+£2.50)
RED n WHITE SUPERSTAR Rim (+£2.50)

WHITE n BLACK SUPERSTAR Rim (+£2.50)
WHITE n BLACK SUPERSTAR Rim (+£2.50)

WHITE n BLUE SUPERSTAR Rim (+£2.50)
WHITE n BLUE SUPERSTAR Rim (+£2.50)

WINTER CAMO Print SUPERSTAR Rim (+£2.50)
WINTER CAMO Print SUPERSTAR Rim (+£2.50)

YELLOW SUPERSTAR Rim (+£2.50)
YELLOW SUPERSTAR Rim (+£2.50)

Matt GREY SUPERSTAR Rim
Matt GREY SUPERSTAR Rim

What colour CLASSIC spokes do you want?
What colour CLASSIC spokes do you want?

CLASSIC Spokes - BLACK
CLASSIC Spokes - BLACK

CLASSIC Spokes - BLUE
CLASSIC Spokes - BLUE

CLASSIC Spokes - BRONZE
CLASSIC Spokes - BRONZE

CLASSIC Spokes - GOLD
CLASSIC Spokes - GOLD

CLASSIC Spokes - GREEN
CLASSIC Spokes - GREEN

CLASSIC Spokes - GUNMETAL
CLASSIC Spokes - GUNMETAL

CLASSIC Spokes - PINK
CLASSIC Spokes - PINK

CLASSIC Spokes - PURPLE
CLASSIC Spokes - PURPLE

CLASSIC Spokes - RED
CLASSIC Spokes - RED

CLASSIC Spokes - SILVER
CLASSIC Spokes - SILVER

Quantity required:
We have enough parts to make…  
RRP FROM £45 - per wheel

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon