This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

TRAMPA Electric VERTIGO Street Carver with V6 VESC & 12s BEAST Box Mini VERTIGO Spring Trucks & Stickies Longboard Wheels

TRAMPA Electric VERTIGO Street Carver with V6 VESC & 12s BEAST Box Mini VERTIGO Spring Trucks & Stickies Longboard Wheels VERTIGO STREET Carveboard - 9.525mm HOLLOW Axle VERTIGO Trucks with Custom STICKIES longboard wheels - SINGLE Motor VERTIGO STREET Carveboard - 9.525mm HOLLOW Axle VERTIGO Trucks with Custom STICKIES longboard wheels - TWIN Motor 15ply 35° SOLID Carve Deck 35° SOLID TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit Mini VERTIGO TRAMPA TRUCKS - CNC FORGED Channel Hanger with 9.525mm HOLLOW Steel Axle CNC Baseplate Stainless Steel Kingpin TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4 STREET Carver Carbon Fibre Motor Mount with Single 6364 Motor & Custom Pulley Kit to fit STICKIES Wheels STREET Carver Carbon Fibre Motor Mount with Single 6364 Motor & Custom Pulley Kit to fit STICKIES Wheels Street Carveboard Bearings fits Stickies Wheels to Mini Spring Trucks R6 2RS ABEC7 9.525mm x 22.225mm x 7.14mm BLACK x 8 SINGLE VESC 6 for BEAST BOX In CNC T6 Silicone Sealed Aluminum Box - Vedder Electronic Speed Controller TRAMPA Special 12s CARBON FIBRE BEAST Box with Internal VESC Housing - AWESOME Complete Beast Box 12s1p Cable Kit with Key Wire, XT90 & XT90s Connectors, 50 Amp Fuse all soldered & heat sealed ready for plug & play use TRAMPA Stamped Silicone Cable! Rechargable Remote Control & Receiver - Thumb Controlled
RRP
£1,050
inc tax

 TRAMPA Carve Decks are Deckscellent! :-)

TRAMPA's range of CARVE Decks is awesome! Once coupled with any of TRAMPA's stunning Carve Trucks (TRAMPA's Carve Trucks are without doubt the sweetest, most advanced Steering system on the market) the combined performance results in a radically different & quite sensational ride experience that is totally un-comparable to anything else that's come along before! The entire TRAMPA CARVE product range instantly looks & performs completely different.... Heads will turn in amazed envy as you carve passed open mouthed on-lookers.... :-)

TRAMPA's CARVE DECKS have been created to give the same carving sensations that are enjoyed when surfing, snowboarding or wakeboarding. Arguably training on the Carve Deck when the snow has melted or when the surf is low will certainly give you the thrill your chasing & will enhance your riding skills for when the conditions are more favorable for you to return!

Amazingly the Hanger in the  Carve Truck is reversible... The Axle is positioned offset in the hanger, NOT Centrally located, so turning around changes all the dimensions and performance... So this means the Carve Truck will assemble to fit to either Street or Urban Carve Decks & when we assemble the Truck, depending on what we are assembling it for (Street or Urban) will depend on which way around we assemble the hanger. It also means you can purchase an additional set of wheels & convert your Street Carve Deck into Urban Carve Deck very easily. The hanger faces forwards (Same as mountainboard) for the URBAN Carve Deck assembly making the overall wheel base longer & the ride height as low as possible to accept the larger sized wheels that lift the deck height back up & by increasing the wheel base gives the extra space to fit the larger wheels at the ends. Setting up the deck for the Street Carve we turn the hanger 180º so it faces inwards (Axles to the inside) shortening the wheel base, raising the ride height to a more acceptable position to be able to accommodate the smaller sized 83 & 90mm Longboard wheels.

The Carve Deck is available as SOLID Deck or the amazing lighter weight 'oval holed' & 'frog mouthed' tipped HOLYPRO Deck which always wow's observer's.... The Street Carve Deck can be pushed like any conventional Longboard but is more in tune with heading down hills & turning tightly, simulating switch back turns like those encountered on large waves when surfing or steep slopes when snowboarding, but with the recent development in the Electric side of things, the Street Carve Deck comes into a complete world of its own once its been assembled with a TRAMPA Motor Mount & a TRAMPA Electric Motor attached to it! OMG words cant explain just how good it is!!

Adding a TRAMPA Motor a TRAMPA 12s Battery box & the new TRAMPA VESC 6 to the CARVER DECK will quite simply transform your life! Un-believable performance up to 50kmph with un-real range of up too 70 Kilometer can easily be achieved. So far in our extensive tests, and Nottingham is a very hilly place, we have not found a hill these beasts cant get up, in fact its not a case of just getting up its a case of ripping back up the hill, being able to stay on the board under such power becomes a 'hill'arious challenge!!

In order for the Street Carver Deck to perform as its name suggests, the trimmed down 35º Deck needs to be fitted to a suitably sized steering system & so we created the MINI SPRING TRUCKS. Mini Spring Trucks are as their name suggests, smaller versions of the original ATB Spring Truck. The original Forged Alloy body of the ATB Hanger has been miniaturised to a more suitable size to compliment the reduction is soze of the deck & in the hope of gaining the performance we were expecting. To retain low weight the smaller sized hanger has been complimented with shorter length & narrower thickness (lighter) 9.525mm Axles which although shorter remain long enough & strong enough to fit both sizes of TRAMPA Longboard wheels (83 & 90mm Longboard wheels) & also the amazing TRAMPA HYPA & TRAMPA SUPERSTAR wheels! TRAMPA's Mini Spring Truck range is Amazing!

ATB Spring Trucks are time tested & proven as being the best steering system your money can buy. They sacrifice a little bit of extra weight over a regular Skate or Longboard style Truck but they gain huge amounts of performance in return. Spring Trucks are far more robust, far more adjustable & far more tunable to your personal requirements than any skate or longboard style truck!

Spring Trucks use a horizontally mounted Kingpin to connect the Baseplate & Hanger together which is completely differently to a regular Longboard Truck which uses a vertically mounted kingpin. Using a horizontally mounted kingpin means the Spring Trucks need to be mounted at 35º to make the steering happen, hence the 35º deck range​. We use high quality (food Industry) precision made Nylon Bushings that push into the metal parts (Baseplate & Hanger have 2 each) allowing the kingpin to push through all the metal parts, connecting them all together tight but being mounted through the precision made nylon bushings still allowing easy movement without creating any wear on the metal parts.

This easy movement needs to be controlled & so by inserting the TRAMPA's special reinforced Stainless steel Spring Retainers into either end of a pair of Springs & then Squeezing the Spring's into the space between the Hanger & Basepate, one either side of the kingpin, the easy movement is soon balanced out giving a nice firm feel to the assembly. By the nature of the name, the Mini spring trucks allow a hell of a lot of steering if riding with a hell of a lot of steering is your thing (like it is mine) then the DAMPA's are not required and when you place the springs into the inside position the steering is un-believably carvy, BUT if you are finding you are going faster than what you are turning & maybe experiencing some speed wobble as you pick up pace, the easy feel steering can easily be increased by firstly increasing the pressure on the spring by turning the Spring Adjuster or for much greater results by adding TRAMPA DAMPA's into the springs before inserting them into the Truck. TRAMPA DAMPA's are premium urethane rubbers that sit inside the springs, supporting the slackness in the springs & help to prevent high speed speed wobble that can be experienced when riding at high speed with loose steering systems....

The Springs are locked into position from the underside of the Truck using 2x M5 x 12mm Marine grade Stainless Steel Countersunk Bolts (Countersunk for flush fitting) tightening into the threaded Spring Retainers & with the use of a very special part made by TRAMPA known as the Marine grade Stainless Steel  Spring Adjuster , the spring adjuster pushes through the from top side of the Deck, Screwing into the Baseplate, the nipple of the adjuster sits inside the Threaded Spring retainer but shamfered at the edge so that pressure can be pushed into the retainer allowing the rider tobe able to pre-compress their steering suitable to their weight, ability & of course personal preference.

Turning the spring adjuster clockwise/anticlockwise changes the tension in the springs, increasing the tension tightens up the steering, so the steering resistance can be Adjusted & tuned to your exact personal preferences or tuned on the fly setting you up for different ride terrains, loose for tight stuff & tight for the faster stuff just by turning the Spring Adjuster, plus for even more performance the Springs can be positioned in 2 places... Locating the Springs into the inside position makes the steering feel super loose & easy to steer giving the ultimate sensation in fast carvy steering, however lock the springs into the outside position & fitting the TRAMPA DAMPA's into the springs, will make the steering feel super tight & perfect for setting the board up for sliding or achieving the highest speeds possible... Amazing!!

The entire Mini Spring Truck range is beautifully constructed from the finest materials, using the latest high tech machinery guaranteeing th highest quality possible is available in the complete INFINITY (Solid Steel Axles) VERTIGO (Hollow Steel Axle with CNC) & ULTIMATE (Titanium Axles with CNC) purchase options.

TRAMPA now offers a fantastic range of 83 & 90mm Longboard Wheel options that have all been made from the absolute best 'Super High Rebound' - Top Quality Premium Urethane. TRAMPA's Longboard wheels use a Center-set bearing position, can be fitted to TRAMPA Slave Gears for Longboards & are colour coded to show the Urethane Hardness performance, Legendary!

BLUE     =  74a Super-soft Urethane
BLACK  =  76a Soft Urethane
WHITE  =  78a Regular Urethane
RED       =  81a Hard Urethane

 

15ply 35° SOLID Carve Deck

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks tightens the steering turning the deck one of the fastest & most stable decks on the market!

The 35° TRAMPA Street Carver deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Street Carver deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

Drillage for Trucks - Accurate and neat

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the

READ MORE...

Complete Deck Weight

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
Component Weight 4,568g 4,568g 4,568g
Complete Deck Weight 6.9 kg 7.1 kg 7.2 kg

Component Weights

SINGLE MOTOR Street Carver Motormount with Pulley Kit1,064g
12s CARBON BEAST Box for SINGLE or TWIN Motor TRAMPA Decks & can Squeeze 2x 6s Zippy compact cells or 12s3p Samsung cells 627g
1x VESC for BEAST BOX with NRF & Protective CNC T6 Heat Sink Housing224g
Super flexible Silicone coated 1036 Strand, 12s1p XT90 Beast Box Cable Kit118g
Rechargable Remote Control & Receiver - Thumb Controlled50g
Mini VERTIGO TRUCKS - CNC Hanger & 9.525mm HOLLOW Steel Axles1,477g
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4908g
TRAMPA ABEC 7 R6 2RS Street Carve Bearings BLACK x 8101g
Total component weight4,568g
Mini VERTIGO TRAMPA TRUCKS - CNC FORGED Channel Hanger with 9.525mm HOLLOW Steel Axle CNC Baseplate Stainless Steel Kingpin
35° SOLID TRAMPA Carve Deck - Drilled, Edged, Fitted with JESSOP Grip tape & a Marine Grade Stainless Steel Countersunk Bolt kit

Blank deck weight chart

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
General Flex Rating firm stiff very stiff
35° SOLID Carve Deck - Drilled, Edged, Gripped & Bolt Kit
Mini VERTIGO TRUCKS - CNC Hanger & 9.525mm HOLLOW Steel Axles
TRAMPA STICKIES Longboard WHEELS 83 or 90mm x set of 4
TRAMPA ABEC 7 R6 2RS Street Carve Bearings BLACK x 8
SINGLE MOTOR Street Carver Motormount with Pulley Kit
1x VESC for BEAST BOX with NRF & Protective CNC T6 Heat Sink Housing
12s CARBON BEAST Box for SINGLE or TWIN Motor TRAMPA Decks & can Squeeze 2x 6s Zippy compact cells or 12s3p Samsung cells
Super flexible Silicone coated 1036 Strand, 12s1p XT90 Beast Box Cable Kit
Rechargable Remote Control & Receiver - Thumb Controlled
------------------------------------------------------------------------------
13 / 37 teeth = ratio of 1 : 2.85 - Best Hill Climber & Easy speed
14 / 37 teeth = ratio of 1 : 2.65 - Good Hill Climber & Nice Speed
15 / 37 teeth = ratio of 1 : 2.50 - Regular Climber & Regular Speed
13 / 33 teeth = ratio of 1 : 2.50 - Regular Speed & Regular Climber
14 / 33 teeth = ratio of 1 : 2.35 - High Speed & Nice Hills
15 / 33 teeth = ratio of 1 : 2.20 - Best Top Speed & Easy Hills
------------------------------------------------------------------------------
The information above is to be used as a guide. Top Speeds achieved & the steepness of the hills the boards can ride up are relevant to the final gearing (the wheel size), the chosen Motor used, Battery size, Rider Weight & Weather conditions.
We do not currently have a battery Management system for you to purchase. We have a solution for this but no money to make it. So we are looking for some like minded investors if there are any wanna be dragons out there...
Do you want SINGLE or TWIN Motor setup?
Do you want SINGLE or TWIN Motor setup?
VERTIGO Electric Street Carver SINGLE Motor - £1050 in tax VERTIGO Electric Street Carver SINGLE Motor - £1050 in tax
VERTIGO Electric Street Carver TWIN Motor - £1500 inc tax VERTIGO Electric Street Carver TWIN Motor - £1500 inc tax
Are you left or Right Foot Forwards rider?? Regular or Goofy??
Are you left or Right Foot Forwards rider?? Regular or Goofy??
LEFT Leg Forwards Rider - REGULAR Stance LEFT Leg Forwards Rider - REGULAR Stance
RIGHT Leg Forwards Rider - GOOFY Stance RIGHT Leg Forwards Rider - GOOFY Stance
What Ply deck do you require...?
What Ply deck do you require...?
14ply SOLID Carve - FIRM 14ply SOLID Carve - FIRM
15ply SOLID Carve - STIFF 15ply SOLID Carve - STIFF
16ply SOLID Carve - STIFFEST  16ply SOLID Carve - STIFFEST
14ply HOLYPRO Carve - FIRM (+£25) 14ply HOLYPRO Carve - FIRM (+£25)
15ply HOLYPRO Carve - STIFF (+£25) 15ply HOLYPRO Carve - STIFF (+£25)
16ply HOLYPRO Carve - STIFFEST (+£25) 16ply HOLYPRO Carve - STIFFEST (+£25)
What colour Baseplate do you want?
What colour Baseplate do you want?
WHITE with Black Logo Baseplate WHITE with Black Logo Baseplate
NAVY with Black Logo Baseplate NAVY with Black Logo Baseplate
RED with Black Logo Baseplate RED with Black Logo Baseplate
BLACK with Silver Logo Baseplate BLACK with Silver Logo Baseplate
D'ya want to Stiffen the steering & add some DAMPAs?
D'ya want to Stiffen the steering & add some DAMPAs?
NO DAMPA's Thanks, I want to carve! :-)
YELLOW DAMPA's Easy (+£7.50) YELLOW DAMPA's Easy (+£7.50)
GREEN DAMPA's Firm (+£7.50) GREEN DAMPA's Firm (+£7.50)
RED DAMPA's Stiff (+£7.50) RED DAMPA's Stiff (+£7.50)
BLUE DAMPA's Very Stiff (+£7.50) BLUE DAMPA's Very Stiff (+£7.50)
WHITE DAMPA's Stiffest (+£7.50) WHITE DAMPA's Stiffest (+£7.50)
What colour Spring do you require?
What colour Spring do you require?
Nickle Plated SILVER  Springs Nickle Plated SILVER Springs
Powder Coated BLUE Springs Powder Coated BLUE Springs
Powder Coated RED Springs Powder Coated RED Springs
Powder Coated WHITE Springs Powder Coated WHITE Springs
Powder Coated BLACK Springs Powder Coated BLACK Springs
What size Motor you would like?
What size Motor you would like?
118Kv Motor - Fantastic Hill Climber 118Kv Motor - Fantastic Hill Climber
136Kv Motor - All Round performance 136Kv Motor - All Round performance
154Kv Motor - Amazing Top Speed 154Kv Motor - Amazing Top Speed
What size SLAVE PULLEY do you want?
What size SLAVE PULLEY do you want?
37 Tooth SLAVE Pulley - Best Hill Climber 37 Tooth SLAVE Pulley - Best Hill Climber
33 Tooth SLAVE Pulley - Best Top Speed 33 Tooth SLAVE Pulley - Best Top Speed
Which Size & Hardness STICKIES Wheels do you want?
Which Size & Hardness STICKIES Wheels do you want?
83mm BLUE - 74a Super Sticky 83mm BLUE - 74a Super Sticky
83mm BLACK - 76a Sticky 83mm BLACK - 76a Sticky
83mm WHITE - 78a Firm 83mm WHITE - 78a Firm
83mm RED - 81a Hardest 83mm RED - 81a Hardest
90mm BLUE - 74a Super Sticky (+£10) 90mm BLUE - 74a Super Sticky (+£10)
90mm BLACK - 76a Sticky (+£10) 90mm BLACK - 76a Sticky (+£10)
90mm WHITE - 78a Firm (+£10) 90mm WHITE - 78a Firm (+£10)
90mm RED - 81A Hardest (+£10) 90mm RED - 81A Hardest (+£10)
What colour Bearings do you want?
What colour Bearings do you want?
Street Carve R6-2RS RED ABEC 7 Bearings Street Carve R6-2RS RED ABEC 7 Bearings
Street Carve R6-2RS BLACK ABEC 7 Bearings Street Carve R6-2RS BLACK ABEC 7 Bearings
Street Carve R6-2RS WHITE ABEC 7 Bearings Street Carve R6-2RS WHITE ABEC 7 Bearings
What colour Vinyl stickers do you want?
What colour Vinyl stickers do you want?
Classic Silver Stickers Classic Silver Stickers
Alpha Blue Stickers Alpha Blue Stickers
Alpha Red Stickers Alpha Red Stickers
Solid White Stickers Solid White Stickers
Golden Bronze Stickers Golden Bronze Stickers
Pimp Chrome Stickers(+£1) - OUT OF STOCK Pimp Chrome Stickers(+£1) - OUT OF STOCK
Thinking of fitting some Bindings?
Thinking of fitting some Bindings?
Please drill for Bindings :-)(+£2.50) Please drill for Bindings :-)(+£2.50)
N0 Binding Drillage Thanks
Please select which Wireless Remote Control you would like...
Please select which Wireless Remote Control you would like...
QUANUM Remote controller & Receiver - Pistol Grip Finger operated - OUT OF STOCK QUANUM Remote controller & Receiver - Pistol Grip Finger operated - OUT OF STOCK
HOBBYKING Rechargable Remote Inc Battery - Pistol grip Finger operated  - OUT OF STOCK HOBBYKING Rechargable Remote Inc Battery - Pistol grip Finger operated - OUT OF STOCK
MAYTECH rechargable Remote & Receiver - Small size Thumb Operated MAYTECH rechargable Remote & Receiver - Small size Thumb Operated
Many of our customers already have chargers that are suitable for charging 12s cells that fit into the BEAST Box, however if you don't have a charger then you will need 1 for sure... Were currently recommending 2x 6200 mAh Zippy compact cells as being ideal power source to run in the Beast Box as they fit perfectly & have loads of performance. You should get between 10-15 miles of range depending on all the factors... The Graupner charger we are currently offering at a reduced price when purchased with this board is the perfect charger for the job if you don't already have one...:
Do you want to add a Graupner 12s Charger
Do you want to add a Graupner 12s Charger
Yes please supply 1x Graupner charger (+£150) Yes please supply 1x Graupner charger (+£150)
No Charger required thanks
Quantity required:
We have enough parts to make…  
RRP £1,050 - Includes Charger, comes Semi assembled, JUST NEED BATTERIES - check Batteries link on front page for options

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Its beyond my gramatical skills to be able describe to you just how good it feels to ride TRAMPA's awesome range of ELECTRIC STREET CARVER DECKS..! To say they are RADICALLY DIFFERENT (not original) or are the most BREATHTAKING BOARDING EXPERIENCE you have only ever dreamed off, (sounds like a load off xxxxxxxx) are honestly for me, both huge understatements, as literally im still shaking my head in dis-belief each time i return back from a ride out on one of them...

TRAMPA's Electric Street Caver is genuinely totally un-comparable to any board that's ever been created before it. For the Carve hungry, it can turn so tight it can throw your off or if flat out speed is your thing they can be setup so stiff it can be set up to go like a rocket!! I guess the closest description i can give is to say something along the lines of 'It feels like the thrill of a motor cross bike, whilst being stood on a surfboard, but on the best run you have ever riden, travelling endlessly or until your feet are burning for a break, its amazing!'

The entire TRAMPA CARVE range (STREET, URBAN 7 GUMMIES) is fully interactive with itself & with the right Pulleys & belt combinations (you need different sized Pulleys to fit the different sized wheels to give you the best correct gearing performance & you will need a different sized belt to fit the different size of pulley correctly) but you can setup the Carve Deck in any of the 3 combinations by simply swapping the wheels & belts really easily. Regardless of the setup the TRAMPA CARVEBOARD instantly looks & performs completely different (better) to everything else before it....

If you have some super smooth surfaces to ride (like i do, the new tram path is like F1 Tarmac & goes for well over 5 miles past my house) then the TRAMPA ELECTRIC STREET CARVER is definitely the model to take, it is so good it will literally transform your life! The deck can be setup to be super loose for intense Ninga carving or set mega tight for Insane Top Speed... All TRAMPA Boards are now fitted as standard with the amazing VESC 6 Speed Controller which is connected with TRAMPA's very own & Highly Flexible Silicone Coated Cables. The Single Motor Carve deck uses the rear mounted Carbon Fiber 12s Beast Box which is capable of housing 1x 12s or 2x 6s batteries (NOT SUPPLIED) to give un-believable power & performance through just 1 wheel making well over 50kmph of Top Speed achievable & too top it off a potential range of well over 15 Kilometers or more can easily be achieved from a single charge of 1x 12s battery. 

There is much debate over whether using a single Motor & Rear mounted Battery Box on your Street Carver compared to a Twin Motor Underboard Battery Box as to what is best...? For sure adding Twin Motors to any TRAMPA Board gives un-imaginable performance. Twin motor setups are powerful machines, they will double your Grip, Increase your acceleration, Take you up steeper hills easier and faster & will run flat out for longer periods of duration, but then of course adding Twin motors on this kind of deck (No Bindings) means then you are forced to take the heavier SOLID Deck & to position the batteries under the board, which i also agree with, putting the batteries underneath the deck makes the Deck look very sleek n Sexy & i get it when people ask what is that on the back of the Single Motor Beast Box deck, (refering to the battery box on the back), however Adding twin motors firstly adds a huge additional cost to your purchase whilst at the same time almost doubles the weight of the board as you will need more batteries which are heavy & 1 more speed controller (not cheap or light) & then the wiring can be challenging with not a lot of room for maneuver and of course it is debatable of some riders are skilled enough to warrant riding Twin Motor all the time... Its like going from Porsche 911 to Porsche 918 Spyder, the difference is very noticable....
However, on first concept the TRAMPA Carve Deck is supposed to be a small sized City bound Urban Styled deck with flex, not Flexi, but it is designed to at least have some good flex about it to make as its not designed as an all out racer, & well by adding the batteries underneath the deck in a tray, of course this tightens the flex considerably & then seeing as im not an electrician & i do not own the skills to make my own custom 18650 battery or repair on when it went wrong, i wonder about the obvious issues of the deck being so flexi whilst having so many expensive batteries in there and from my own experience, (i ride a too & from work daily), eventually you get caught out by the weather & your forced to wait it out in the pub for the rain to die down, but eventually you have to head home but its still wet & everything is getting soaked... it happens... & that's when my mind tends to worry about the cells being located under the flexi deck...
In the first place the Carve range of products are designed to be smaller & much lighter weight versions of the original TRAMPA Mountainboards. The Carver Decks were to be designed smaller & ligter to be far more use friendly in the new environment they are designed to live in, in my experience riding mostly on cycle paths your often at Traffic lights with roads to cross... My Single Motor Ultimate Urban Carver is so easy to jump of & pick up at the lights, it weighs just over 9kg is really light well balanced n dead easy to pick up by simply slipping my middle fingers through the HOLYPRO holes in the top of the deck, im able to jossle my way to the front of any ques and im usually ahead of any cyclists trying to puff theor way to work & as i like to carve loads on my route to work i love my deck to be super flexi, im 75kg using 14ply Holypro & having nothing underneath the deck it means i can literally jump up and down on the deck like its name suggests, like a TRAMPALINE!! 
In my opinion The Mountain boards are for more suitably sized & work in an environment where they demand the extra Grip & performance to take Twin motors, however, genuinely speaking, as a City/Urban styled boarder using the single motor deck from the day it was first created, i am yet to find a street the single motor boards cant get up, for sure i have found some where they could take a different gearing and if i wasnt short of time id change the pulley to be smaller to make it easier up the steepest of hills but then i would sacrifice my top end speed a little bit for everything else thati rde, so maybe if i lived in a very hilly place (say San Francisco) then maybe i would be more inclinded to look towards making myself a very special TWIN Motor setup for sure, but even then if i decided to take the twin motor setup i think id still consider the larger mountainboard style board with battery on the top so i still have lots of the flex i like to ride....

On the same subject, Nottingham is a very hilly place claiming the 2nd steepest Street in England & we (the TRAMPA Crew) seriously do a lot of riding... We live close to the office & ride into & out of work everyday the weather is good enough too, perhaps with a detour & few pints on the way home, we have gone everywhere we can & so far we have not found a hill/road/street that these 12s Street Carve Beasts cant get up, in fact its not a case of just getting up the hill,once you have a Twin Motor setup its no longer a case of getting up its a case of literally ripping back up the hill, being able to stay on the board when heading up a steep hill on a board with such power becomes a mind blowing 'Hill-arious' challenge un-imaginable until tried!! lol :-)

TRAMPA's Electric Boards are sold to you as an advanced DIY project & the final assembly will need completing by you. At an additional cost TRAMPA is now able to supply a selection of suitable chargers relevant to the batteries we suggest you take from Hobbyking, but mostly due to shipping restrictions we are not currently capable of selling you the Batteries, this is mostly due to international security measures not allowing the items to fly, the criteria is quite challenging & TRAMPA is too small, were just not setup for that just yet, however the exact equipment i & all the team use is available from local stores to you, & if it is not available locally you can get batteries from companies who for fill the shipping requirements very easily compared to us. All the Components & Motor Mounts are assembled by Hand at the TRAMPA HQ & no drilling or modifications by you should be needed to be mahe the final assembly, but the Components will need fixing together when you receive them. Sending the Deck in component form saves incredibly on the shipping costs & gives you the best chance to learn your board, which in turn will give you the insight for maintenance, which should be completed on a regular basis & to be able to fix it should anything go wrong when out on a ride! Manuals for the assembly can be found within the Manual Tab showing underneath the main product image.


TRAMPA Carve Decks are Deckscellent! :-)

TRAMPA's Vertigo CARVE Deck is awesome! Once coupled up to the TRAMPA Carve Trucks (TRAMPA's Carve Trucks are without doubt the sweetest, most advanced Steering system on the market) the combined performance results in a radically different & quite sensational ride experience that is genuinly un-comparable to anything else that's come along before! The entire TRAMPA CARVE product range instantly looks & performs completely different.... Heads will turn in amazed envy as you carve passed open mouthed on-lookers.... :-)

TRAMPA's CARVE DECKS have been created to give the same carving sensations that are enjoyed when surfing, snowboarding or wakeboarding. Arguably training on the Carve Deck when the snow has melted or when the surf is low will certainly give you the thrill your chasing & will enhance your riding skills for when the conditions are more favorable for you to return!

Amazingly the Hanger in the  Carve Truck is reversible... The Axle is positioned offset in the hanger, NOT Centrally located, so turning around changes all the dimensions and performance... So this means the Carve Truck will assemble to fit to either Street or Urban Carve Decks & when we assemble the Truck, depending on what we are assembling it for (Street or Urban) will depend on which way around we assemble the hanger. It also means you can purchase an additional set of wheels & convert your Street Carve Deck into Urban Carve Deck very easily. The hanger faces forwards (Same as mountainboard) for the URBAN Carve Deck assembly making the overall wheel base longer & the ride height as low as possible to accept the larger sized wheels that lift the deck height back up & by increasing the wheel base gives the extra space to fit the larger wheels at the ends. Setting up the deck for the Street Carve we turn the hanger 180º so it faces inwards (Axles to the inside) shortening the wheel base, raising the ride height to a more acceptable position to be able to accommodate the smaller sized 83 & 90mm Longboard wheels.

The Vertigo Carve Deck is available as SOLID Deck or the amazing lighter weight 'oval holed' & 'frog mouthed' tipped HOLYPRO Deck which always wow's observer's.... The Street Carve Deck can be pushed like any conventional Longboard but is more in tune with heading down hills & turning tightly, simulating switch back turns like those encountered on large waves when surfing or steep slopes when snowboarding, but with the recent development in the Electric side of things, the Street Carve Deck comes into a complete world of its own once its been assembled with a TRAMPA Motor Mount & a TRAMPA Electric Motor attached to it! OMG words cant explain just how good it is!!

Adding a TRAMPA Motor a TRAMPA 12s Battery box & the new TRAMPA VESC 6 to the CARVER DECK will quite simply transform your life! Un-believable performance up to 50kmph with un-real range of up too 70 Kilometer can easily be achieved. So far in our extensive tests, and Nottingham is a very hilly place, we have not found a hill these beasts cant get up, in fact its not a case of just getting up its a case of ripping back up the hill, being able to stay on the board under such power becomes a 'hill'arious challenge!!

BLUE   =  74a Super-soft Urethane
BLACK = 76a Soft Urethane
WHITE = 78a Regular Urethane
RED    =   81a Hard Urethane

 

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon