This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

TRAMPAs Electric Street Carver with Mini INFINITY Spring Trucks & STICKIES Longboard Wheels

schematic

flexometer

By altering the number of layers of material that we add into the mould, we are are able to tune the final performance of the TRAMPA decks relevant to the riders weight height & ability. Please use the FLEXOMETER above as a guide to help you choose the right ply board for you. TRAMPA's FLEXOMETER information is to be interpreted as a 'GUIDE ONLY' as there is no fixed rule as to which is the exact right deck for you. The weight, height & ability of the rider will all help determine which is the right sort of deck for you, but of course the most important factor is personal preference as to how the rider wants their deck to feel.... Some riders like it flexi, some like it firm, some like it very very stiff.... It depends on what you are doing on your board, i.e. freestyle, freeride, boarder-cross, altho there is guidance there is no right & no wrong just personal preference but when purchasing a deck from TRAMPA we want to make sure you get it exactly the way you want it! so if your stuck as to which one is the best for you them please drop as a line...


35° Solid Street Carver Deck - Drilled, Edged, Sanded & Gripped with Bolt kit

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the Trucks tightens the steering turning the deck one of the fastest & most stable decks on the market!

The 35° TRAMPA Street Carver deck is available in 3 different flex rates, 14ply is the most flexible, 16ply is the stiffest. Please use the FLEXOMETER in the TAB ABOVE for guidance as to which is the most suitable ply deck for you or mail this link if you need some extra guidance. The 35° TRAMPA Street Carver deck is only supplied as Drilled, Edged & Sanded, Fully Gripped & with Marine Grade Stainless Steel Bolt Kit!

Regardless of which deck you choose, all TRAMPA Decks are totally Un-Breakable! We offer you a lifetime gaurantee! Our incredible composite material is so strong whilst still flexible, the material will not split, delaminate or break in any way regardless of the environment you use it in. TRAMPA decks are considered the "Poppiest" decks on the market, the performance is un-matched, you will fly higher & have more cushioned landings thanks to the performance of the deck! All TRAMPA deck's are customised to suit the riders weight, ability & personal preference.

INFINITY Street Carve TRUCKS - 9.525mm SOLID Steel Axle for the Carve Board - Silver

The MINI INFINITY TRUCK is a radically designed masterful piece of absolute steering lushness. It is without doubt the sweetest steering system ever to be seen! 

TRAMPA's MINI SPRING TRUCK range is spawned from the well proven & highly respected 'ATB Spring Truck' where its reputation of being the best is well known about. The MINI Spring Truck is supplied with 'Dual Spring Positions'. Having Dual Spring positions means the rider has even more Tune-ability than the regular ATB Spring Truck. The rider can adjust & custom tune their steering range to just about any setting they can imagine.... It is possible to 'move the springs into the inside position', making the steering easy to turn & super loose, making the performance perfect for incredibly sexy CARVY TURNS.... Alternatively if Carvy turns is not your thing try moving the springs 'into the outside position' & then 'Adding TRAMPA DAMPA's into the springs' before inserting into the truck, thus making the steering as STIFF as you could ever imagine, setting you up perfectly for the fastest of high speed runs when & where ever possible....!

Using the highest quality FORGED Alloy we could find for the Hanger Body & EXTRUDED & T6 HEAT TREATED 6061 Aluminum for the Baseplate, just like its name suggests, the INFINITY Spring Truck Steering System is designed to last forever! The MINI INFINITY Hanger is fitted with 9.525mm SOLID STEEL AXLES whilst the assembly of the Truck is made by the use of a 'Horizontally mounted' Nikle plated Kingpin. 

The MINI INFINITY TRUCK has NOT been CNC'd light weight, it is full fat with super strength, any size/weight rider will be able to stand on these no problem!! But the Hanger & Baseplate "Kingpin Holes" are CNC precision milled, allowing the Truck to assemble like a dream - everything fixes together perfectly enabling the MINI INFINITY TRUCKS to provide problem free, precision riding!

NYLON BUSHINGS are inserted into the Kingpin mounting holes of the Hanger & Baseplate. The Bushings provide a flush scratch free connection which also eliminates wear between the moving metal parts. An 8mm KINGPIN is used to connect the 2 integral parts together, allowing the steering to happen.. SPRINGS are squeezed (by hand) into the mounting positions between the Hanger & Baseplate. When anchored in position they give resistance to the steering. The steering resistance can be pre-set to your weight, riding ability & personal preference and it is easily adjusted by using a 4mm Allen Key & turning the Spring Adjuster clockwise, pre-loading the resistance in the spring. Additionally a TRAMPA DAMPA can be fitted to add extra resistance to the spring..... TRAMPA DAMPA's come in 5 different hardness there is one for every type of rider! You can quickly adjust your board relevant to the conditions or terrain ahead... Over time your riding will improve and you will demand more pre-tension (performance) from your steering. So remember the Dampa's need some room to work and so don't over tighten your springs squashing the Dampa's too much because ultimately they will split, instead change your Dampa's to a slightly Harder Shore Resistance.

TRAMPA's Street Carve Board range is the perfect all round deck aimed at Snowboarders, Surfers, Skaters, Longboarders & of course Mountainboarders wanting to cross over to ride the Tarmac....

STICKIES Longboard & Street Carver Wheels - 83 x 52mm - 76a Soft Urethane BLACK x4

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, & available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit too ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensures an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application.... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of this 83mm Longboard wheel sits 19mm thick x 52mm wide of BLACK '76a' (Sticky) PREMIUM URETHANE. 76a urethane is nice & GRIPPY!! Choosing the 76a Grippy option will enable you to run at good speeds & be able to Carve & Turn tight without slipping out, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else...

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLACK STICKIES WHEEL is a coordinating SILVER TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

The 35° TRAMPA Street Carver deck is the latest deck in the TRAMPA range. It has been specifically shaped to work with the new Street Carver range of Truck steering systems. Choosing a low ply flexier deck makes carving on the street a fantastic sensation, whilst choosing a stiffer deck & adding DAMPA's into the READ MORE...

Complete Deck Weight

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
Component Weight 3,644g 3,644g 3,644g
Complete Deck Weight 6.0 kg 6.1 kg 6.3 kg

Component Weights

Street Carver Motor Mount Axle Support 6364 Motor & Pulley Kit - REGULAR1,069g
INFINITY Street Carve TRUCKS - 9.525mm SOLID Axle - Silver1,652g
83 x 52mm BLACK Stickies Longboard Wheel 76a Grippy x4908g
TRAMPA ABEC 7 R6 2RS STREET CARVE BEARINGS BLACK x 810g
400mm Hand made TRAMPA Vinyl Sticker - SILVER5g
Total component weight3,644g
INFINITY Street Carve TRUCKS - 9.525mm SOLID Steel Axle for the Carve Board - Silver
STICKIES Longboard & Street Carver Wheels - 83 x 52mm - 76a Soft Urethane BLACK x4
35° Solid Street Carver Deck - Drilled, Edged, Sanded & Gripped with Bolt kit

Blank deck weight chart

Deck Ply 14 ply 15 ply 16 ply
Blank Deck Weight 2,350g 2,500g 2,650g
General Flex Rating firm stiff very stiff
Items included in this sale are described below & detailed in the PARTS tab above
INFINITY Street Carver on ULTRA High Rebound premium 83mm Longboard Wheels
Street Carver Motor Mount Axle Support 6364 Motor & Pulley Kit - REGULAR
------------------------------------------------------------------------------
13 / 37 teeth = ratio of 1 : 2.85 - Best Hill Climber & Easy speed
14 / 37 teeth = ratio of 1 : 2.65 - Good Hill Climber & Nice Speed
15 / 37 teeth = ratio of 1 : 2.50 - Regular Climber & Regular Speed
13 / 33 teeth = ratio of 1 : 2.50 - Regular Speed & Regular Climber
14 / 33 teeth = ratio of 1 : 2.35 - High Speed & Nice Hills
15 / 33 teeth = ratio of 1 : 2.20 - Best Top Speed & Easy Hills
------------------------------------------------------------------------------
The information above is to be used as a guide. Top Speeds achieved & the steepness of the hills the boards can ride up are relevant to the final gearing (the wheel size), the chosen Motor used, Battery size, Rider Weight & Weather conditions.
We do not currently have a battery Management system for you to purchase. We have a solution for this but no money to make it. So we are looking for some like minded investors if there are any wanna be dragons out there...















Advance purchase a VESC 6 with your TRAMPA E-Board & purchase at a discounted price. Delivery of VESC is slightly behind schedule but due in UK May 2017:



Quantity required:
RRP £600 - per deck

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
Approx. shipping price:

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon