This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Urban to Street Carveboard complete Conversion kit with Stickies Longboard wheels - TWIN

Urban to Street Carveboard complete Conversion kit with Stickies Longboard wheels - TWIN Street Carver Truck Motor mounting panel Connector - T6 Aluminum CNC'd to fit Regular or Goofy Motor mount Panels    STREET Carver Truck Carbon Fibre Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick - REGULAR 37 Tooth Slave Wheel for 83mm & 90mm Longboard Wheels SILVER - High Torque M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste 330mm long x 15mm wide HTD 5M HP STRONGBELT for STREET CARVE Motor Mounts USING Street Carve Panel & 33 or 37 Tooth Slave STICKIES Longboard & Street Carver Wheels - 90 x 52mm - 74a Super Sticky Urethane BLUE x4 R6 2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) - BLACK 9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm
RRP
£300
inc tax

R6 2RS Abec 7 TRAMPA STREET CARVE Bearing used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) - BLACK

TRAMPA's STREET BOARDS (Carveboard & Longboard) use special Bearings to fit the Longboard style wheels to the TRAMPA Mini Spring or the new TRAMPA Extra wide Longboard Trucks. To handle the extra forces a wider Axle may suffer (potentially fitting an electric motor will transform the forces) we choose to increase the size & thickness of the Axle to a new standard imperial size of 3/8ths of an inch which translates in Metric measurement size of 9.525mm. So in order to fit regular Longboard wheels to the Mini Spring trucks or the New TRAMPA Extra Wide Longboard Trucks you will need the special R6 2RS Bearings

Available with either RED, BLACK or WHITE embossed TRAMPA sidewalls  the R6 2RS Bearings will fit to most regular Longboard & Skateboard wheels currently on the market. R6 tells you the bearing standard size & the 2RS means the bearing has 2 Removable Sidewalls. The Removable Rubber sidewalls seal the single row of lubricated ball bearings within the Chrome Steel housings, protecting them from the elements such as dust & dirt, maintaining maximum performance to the board & rider for as long as possible. The rubber sealed sidewalls are embossed with the TRAMPA & ABEC 7 logo proving Top Quality & are removable so that you can service & clean your bearings on a regular basis maintaining high performance all of the times!

Precision made R6-2RS TRAMPA Bearings are polished to an internationally recognised ABEC-7 quality. (ABEC 3-5 is recognised as the industry standard). ABEC 7 polishing gives you a super smooth / super fast ride which prolonges top end roll speeds.... :-)

M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special Bolt is specifically made for TRAMPA & is used to assemble the TRAMPA SUPERSTAR HUBS. The socket capped head of the Bolt screws neatly though the Spokes & into the fixing point in the Rim of the SUPERSTAR HUB eventually screwing  into the M4 nut on the other side easly.

Weighing just 3 grams each, they are very lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

USED FOR: 
 
SUPERSTAR HUBS
MEGASTAR HUBS

330mm long x 15mm wide HTD 5M HP STRONGBELT for STREET CARVE Motor Mounts USING Street Carve Panel & 33 or 37 Tooth Slave

This is a 330mm long x 15mm wide High Torque Drive (HTD) Re-enforced Rubber Belt, which has 5mm Tooth Spacing (5M). It is a High Power rated (HP) TRANSMISSON BELT made by the world famous German Brand called STRONGBELT. This one is used to transfer the power from the Motor & Motor Pulley into power at the rear wheels of a TRAMPA Electric Street Carver

TRAMPA opted to set a new standard in E-Skating, becoming the first in the world to fit to all of its E-Boards in its range a 15mm wide TRANSMISSION BELT. Our standard 15mm belt is almost double the width of nearly all other E-Sk8's out there, they tend to use a flimsy off the shelf 9mm transmission belt which can be prone to stretch, slip & ultimately snap. Using a re-enforced 15mm wide High Power Belt reduces stretch, eliminates slip & as a consequence provides a constantly smooth whilst incredibly intuitive power delivery direct to the rear Drive Wheels of your board. When accelerating or engine breaking (KERS), even from a standing start the STRONGBELT power remains smooth & does not slip, or strain the motor, it does a damn gooood job!.....

STRONGBELT, as their name suggests, is a Heavy Industry Brand that usually supplies the likes of Train manufacturers where serious levels of quality with no excuses on failure are expected from the product, as failure for such an item is serious & may result in death! STRONGBELT weave KEVLAR into their Pulley Belts, Kevlar is one of the strongest fibers known to man, its often added into materials to gain extra strength.... STRONGBELT have the best reputation in the Power Transmission Industry for NO stretching or snapping & we have high expectations from this quality item. 

These extra quality details in the production of our electronic motor drives, provides the maximum responsiveness achievable whilst maintaining a super smooth power delivery to the rider at all times. 

STREET Carver Truck Carbon Fibre Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick - REGULAR

Made from 3k Twill Carbon Fibre then Laser cut to precision, this Street Carver Motor Mount Carbon Fibre Panel is made specifically to fit the TRAMPA 118Kv & 136Kv Motors but will also fit many other Brand motors which are similar sized (6364) to the TRAMPA Motors.

To Mount this LEFT foot forwards riding (REGULAR) Street Carver Carbon Motor Mount Panel to your Stret Carver Trucks you will need the Street Carver Truck Motor Mount connector, 2x very special ball ended Flat nosed M8x16mm Grub Srews which lock the Connector to the Hanger & 4x M5x16mm Countersunk Bolts to secure the Carbon Fiber panel to the motor mount connector. 

The Street Carver Truck is basically the same as the Urban Carve Truck, the only difference being that the Hanger is facing the oposite direction in assembly. so its possible for your Carver Truck to be BOTH STREET CARVER & URBAN CARVER However if you then wish to add electric motors, you will need different kits for the different Street or Urban boards as the shape of the Hanger is different according to its direction of mount...

QUESTION
I'm also wondering, will the motors from Ollin Board Company fit on any of your motor mounts?

ANSWER
I guess the Olin motors will fit to our Motor Mounts no problem, but you will not gain the full benefits of our equipment as the motor axle shaft in the TRAMPA Motors is much longer & so our Mount makes the most of the bearing assisted motor axle support system which supports the axle shaft preventing bent axle shafts, belt slip & wear and tear. Generally the Axle Shaft Support system gives a much better performance all round as it holds the belt in the perfect position, but arguably yes your motors will attach to our Carbon Fibre motor mounts....

STREET Carver Truck Carbon Fibre Motor mounting panel made from 3k Twill Carbon Fibre 5mm Thick - REGULAR

Made from 3k Twill Carbon Fibre then Laser cut to precision, this Street Carver Motor Mount Carbon Fibre Panel is made specifically to fit the TRAMPA 118Kv & 136Kv Motors but will also fit many other Brand motors which are similar sized (6364) to the TRAMPA Motors.

To Mount this LEFT foot forwards riding (REGULAR) Street Carver Carbon Motor Mount Panel to your Stret Carver Trucks you will need the Street Carver Truck Motor Mount connector, 2x very special ball ended Flat nosed M8x16mm Grub Srews which lock the Connector to the Hanger & 4x M5x16mm Countersunk Bolts to secure the Carbon Fiber panel to the motor mount connector. 

The Street Carver Truck is basically the same as the Urban Carve Truck, the only difference being that the Hanger is facing the oposite direction in assembly. so its possible for your Carver Truck to be BOTH STREET CARVER & URBAN CARVER However if you then wish to add electric motors, you will need different kits for the different Street or Urban boards as the shape of the Hanger is different according to its direction of mount...

QUESTION
I'm also wondering, will the motors from Ollin Board Company fit on any of your motor mounts?

ANSWER
I guess the Olin motors will fit to our Motor Mounts no problem, but you will not gain the full benefits of our equipment as the motor axle shaft in the TRAMPA Motors is much longer & so our Mount makes the most of the bearing assisted motor axle support system which supports the axle shaft preventing bent axle shafts, belt slip & wear and tear. Generally the Axle Shaft Support system gives a much better performance all round as it holds the belt in the perfect position, but arguably yes your motors will attach to our Carbon Fibre motor mounts....

37 Tooth Slave Wheel for 83mm & 90mm Longboard Wheels SILVER - High Torque

TRAMPA's 33 Tooth Slave Wheel connects into all of TRAMPA's 83mm & 90mm Longboard Wheels perfectly! It connects through the Longboard Wheel using an Aluminum Centering Ring & M4 x 40mm Bolts with M4 M4 Nylock Nuts to lock it into position.

This custom made Slave Wheel can accept any size belt up to 17mm. TRAMPA uses's a German made 15mm wide STRONGBELT which provides a very smooth power delivery to the user, even from a standing start....

Changing your Motor Pulley &/or Slave pulley wheels will drastically change the performance characteristics of your ride... Small Pulleys at the Wheel Slows accelleration but increase's top the speed! :-)

STICKIES Longboard & Street Carver Wheel Super High Rebound 90 x 52mm 74a SUPER STICKY BLUE

TRAMPA's incredible range of STICKIES Longboard Wheels have taken the world of Longboarding by storm! Produced using the highest grade of Ultra Premium Urethane, and available in either 83 or 90mm size options with a varying range of suitably colour co-ordinatied Urethane Hardnesses, the variety compliments all the different types of rider, covering all the different aspects of street riding. You will be pleased to learn STICKIES Longboard Wheels will fit to ALL Longboard, Street-board & Skateboard Trucks using 8 or 9.525mm Axles.

The re-enforced VENTED CORE of the STICKIES Wheel houses a Center-set bearing position. For those that don't know this means the bearings are housed centrally within the wheel. Being center-set ensure an even wear rate to the wheel ensuring maximum grip at all times, whilst guaranteeing a balanced "high speed spin-rate", thus making turning/sliding as predictable as possible! Not only does the vented core reduce weight, but it also increases airflow around the Bearings ensuring lower operating temperatures when running at high speeds...

The Vented Core also has an extra application... The Venting holes can be used in conjunction with a centering ring & some M4x40mm Socket Capped Bolts to lock into position, either a 33 or 37 Tooth Slave Wheel, to which the complete assembly can be connected to many applications using an electric motor, including the new TRAMPA Electric Longboards & Electric Street-Carver boards as well as many other products due onto the market soon!

Smothering the Vented Core of the STICKIES Longboard wheel is thick PREMIUM URETHANE. Choosing STICKIES will enable you to Carve & Turn like you have only ever dreamed of before, especially when mounted to the new TRAMPA Mini Spring Trucks which happen to turn & carve like nothing else! STIKIES Wheels will also fit to the new 12FIFTIES Trucks and all 8mm Longboard trucks on the Market.

The edges of all the STICKIES wheels are beautifully rounded allowing smooth transitional turns, whilst helping to avoid chipping & cracks at the same time. The rounded edge of the STICKIES wheel gives an overall contact surface of 50mm! Orbiting the outer edge of the BLUE STICKIES WHEEL is a coordinating BLACK TRAMPA logo.

STICKIES will accept regular skate size 608 2RS (8 x 22 x 7mm) bearings & made special for the TRAMPA Mini Spring Trucks, the R6 2RS (9.525 x 22,225 x 7.14mm) Bearings. All of TRAMPA's Longboard/Streetboard bearings are ABEC 7-9 rated & are designed for prolonged high speed use. 

9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks

Precision made to ensure an accurate fit with no rattles, this Polished9.525mm x 13.52mm x 10mm long "precision made Aluminium spacer" fits onto the axles of the Carveboard Trucks & also in-between the Bearings of the Carveboard Wheels. The Bearing Support Spacers get crushed over time from constant tightening, so check the spacer is fitting well and replace if necessary over time.

9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks

Precision made to ensure an accurate fit with no rattles, this Polished9.525mm x 13.52mm x 10mm long "precision made Aluminium spacer" fits onto the axles of the Carveboard Trucks & also in-between the Bearings of the Carveboard Wheels. The Bearing Support Spacers get crushed over time from constant tightening, so check the spacer is fitting well and replace if necessary over time.

Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm

This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!

In this kit you get the following items......
Street Carve Truck Motor Mount Connector - T6 Aluminum
Street Carver Carbon Fibre Motor mounting Panel - REGULAR
Street Carver Carbon Fibre Motor mounting Panel - REGULAR
37 Tooth Slave Wheel for 83mm & 90mm Longboard Wheels SILVER- High Torque
M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel
330 x 15mm Belt - Street Carve (using Street Motor Mount panel)
90 x 52mm BLUE Stickies Longboard Wheel 74a Super Sticky
TRAMPA R6 2RS Abec 7 STREET CARVE Bearings - BLACK
9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks
9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks
Shim spacer - ensures exact fitting & fast running bearings
Weight: 1,499g
What size SLAVE PULLEY do you want?
What size SLAVE PULLEY do you want?
37 Tooth - Best Hill Climber 37 Tooth - Best Hill Climber
33 Tooth - Best Top Speed 33 Tooth - Best Top Speed
Which Size & Hardness STICKIES Wheels do you want?
Which Size & Hardness STICKIES Wheels do you want?
83mm BLUE - 74a Super Sticky 83mm BLUE - 74a Super Sticky
83mm BLACK - 76a Sticky 83mm BLACK - 76a Sticky
83mm WHITE - 78a Firm 83mm WHITE - 78a Firm
83mm RED - 81a Hardest 83mm RED - 81a Hardest
90mm BLUE - 74a Super Sticky (+£10) 90mm BLUE - 74a Super Sticky (+£10)
90mm BLACK - 76a Sticky (+£10) 90mm BLACK - 76a Sticky (+£10)
90mm WHITE - 78a Firm (+£10) 90mm WHITE - 78a Firm (+£10)
90mm RED - 81A Hardest (+£10) 90mm RED - 81A Hardest (+£10)
What colour Bearings do you want?
What colour Bearings do you want?
RED 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 RED 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
BLACK 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 BLACK 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
WHITE 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 WHITE 9.525 x 22.225mm R6-2RS STICKIES Bearings x8
CERAMIC 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 (+£25) CERAMIC 9.525 x 22.225mm R6-2RS STICKIES Bearings x8 (+£25)
Quantity required:
We have enough parts to make…  
RRP £300 - for the complete set

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

Related Products

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon