This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

9.525mm (3/8ths of an Inch) TITANIUM axle Skate hanger - Powdercoated White & BLACK Logo

9.525mm (3/8ths of an Inch) TITANIUM axle Skate hanger - Powdercoated White & BLACK Logo
RRP
£35+

TRAMPA's 9.52mm TITANIUM axle SKATE HANGER BODY is produced from FORGED ALUMINUM. Forging is used whenever Aluminum is required to perform to its maximum strength capability. During the forging process workers insert the TITANIUM Axle into the mould. The TITANIUM Axle is weight for weight much stronger & lighter than the steel skate truck alternatives, and  fixing the Axle to the hanger body in this way gives the strongest possible connection between the two metals.  The Hanger is BEAD POLISHED to give a nice smooth surfce & POWDER COATED WHITE for best metal protection & is finally given a co-ordinating BLACK TRAMPA LOGO to Pimp its appearance!

Skate Trucks originally came from the USA. In the USA they use Imperial Measurements (Inches & Feet) to make their calculation. In order for us to remain compitible with the rest of the world we decided to make our skate Axles the same, so what we call our 10mm skate trucks actually have an axle dimension of 3/8ths of an Inch, which is the Metriic equivilant of 9.52mm. As everything gets rounded up these days & because 9.52mm does not roll of the tongue so easy, we decided to help the situation by refering to these 9.52mm Kkate Axles as being 10mm.

12mm SKATE TRUCKS are light weight. Saving weight will bring obvious benefits to freestyle Kiteboard riders aiming to go big, BUT Skate Trucks are not the strongest Trucks in the TRAMPA product range & we do not recommended they be used by large sized adult riders seeking huge freestyle moves as over time & especially after some hardcore mis-use, these Hangers can get bent & ultimately become un-usable! Top riders accept that the Skate trucks are not the strongest, and are generally quite happy to purchase replacements from time to time as their price to replace and light weight-ness is un-matched by any other style of steering system. So, if your going on a big riding session or road trip to a far off location, may we suggest you carry a spare one of these to cover emergencies... There is nothing worse than getting all the way to a remote location & then a stupid mistake stops your fun...

There is an Interconnecting PIVOT CUP that sits between the BASEPLATE & the HANGER. Its a small plastic part which after prolonged use will wear out and need replacing. Carry spares of this part & for best performance check its condition before ridging. As a tip, when replacing these bushings try to squeeze the new one into old one rather than simply remove & replace... 12mm x 28 x 8mm TRAMPA Skate size Bearings fit as standard to the TRAMPA 12mm Skate Trucks.

The TITANIUM Skate Hanger measures 15.5 Inches in total width. When the wheels are fitted to the Hanger, the board has a center wheel width of 13.5 Inches. TRAMPA's 12mm skate Hanger uses 2x 44mm x 10mm Polished SPACERS (1 either side). The spacer slips onto the axles, leaving the perfect space to mount the TRAMPA wheels accurately. Use the 3/8ths of an inch Axle Nuts to lock the wheels into place on the axle.

 

TRAMPA's 9.52mm TITANIUM axle SKATE HANGER BODY is produced from FORGED ALUMINUM. Forging is used whenever Aluminum is required to perform to its maximum strength capability. During the forging process workers insert the TITANIUM Axle into the mould. The TITANIUM Axle is weight for weight stronger & lighter than the steel skate truck alternatives. Fixing the Axle to the hanger in this way gives the strongest possible connection between the 2 metals. The Hanger is BEAD POLISHED to give a smooth surface & POWDER COATED WHITE for best surface protection & is given a co-ordinating BLACK TRAMPA LOGO to Pimp its appearance!

TITANIUM SKATE TRUCKS are MEGA light weight. Saving weight will bring obvious benefits to freestyle Kiteboard riders aiming to go big, BUT Skate Trucks are not the strongest Trucks in the TRAMPA product range & we do not recommended they be used by large sized adult riders seeking huge freestyle moves as over time & especially after some hardcore mis-use, these Hangers can get bent & ultimately become un-usable! Top riders accept that the Skate trucks are not the strongest, and are generally quite happy to purchase replacements from time to time as their price to replace and light weight-ness is un-matched by any other style of steering system. So, if your going on a big riding session or road trip to a far off location, may we suggest you carry a spare one of these to cover emergencies... There is nothing worse than getting all the way to a remote location & then a stupid mistake stops your fun...

The TITANIUM Skate Hanger measures 15.5 Inches in total width. When the wheels are fitted to the Hanger, the board has a center wheel width of 13.5 Inches.

TITANIUM Axle Skate Hanger - Black Logo
Weight: 298g
Sorry this product is out of stock. Please try again later.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon