This site is best viewed in Google Chrome, Firefox or Safari. Click here to remove this message.

Custom 10 inch Primo Wheel - Primo 3 Spoke composite Hub with 10 Inch Tyre

Custom 10 inch Primo Wheel - Primo 3 Spoke composite Hub with 10 Inch Tyre Custom 10 inch Primo Wheel - Primo 3 Spoke composite Hub with 10 Inch Tyre PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres PRIMO 3 Spoke Composite Hub 3.75/4x 2.5 Inch - Perfect for 9 inch tyres CUSTOM 10 inch Tyre Custom 10 inch Primo Wheel - Primo 3 Spoke composite Hub with 10 Inch Tyre 10 INCH Re-enforced Inner Tube made by INNOVA - 260x65mm
RRP FROM
£40+

How to put a wheel on an Infinity or Vertigo truck

How to put a wheel on an Ultimate Truck

M6 x 30mm Socket Capped Allen-Key Bolt for primo hub - Marine Grade Stainless steel

TRAMPA's M6 x 30mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the PRIMO 3 Spoke Hubs. The socket capped head of the Bolt screws neatly though the HUB eventually screwing into the Marine Grade Stainless Steel M6 Nylock Nut on the other side of the hub. 

Weighing just 8 grams each, these Bolts are lightweight, look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers nuts & bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You’ll will need a 5mm Allen Key  to tighten & loosen the Bolt from the nut. Ensure all your Nuts & Bolts are tight before riding!

M6 Nut - Marine Grade Stainless steel Nylock Nut - Fixes Bindings & Trucks to Deck

Introducing TRAMPA's M6 (6mm Thread) A4 Grade Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M6 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M6 Bolts that hold the TRUCKS to the DECK for the HOLYPRO Decks & also for the countersunk bolts connecting the L BRACKETS TO the DECKs. Use an 10mm spanner or SOCKET for a Ratchet Driver to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

10 INCH Inner Tube INNOVA 10x3 Inch 250x80mm - fits 4 inch Rims & 10 inch tyres

INNOVA's Re-enforced 9 Inch inner tube measures 225mm x 65mm and will fit into all the of the 9 inch Tyres on the TRAMPA website. This 9 Inch Inner Tube will also fit into the tyres of other brands. Being made from slightly thicker rubber, this Inner Tube is slightly heavier than alternatives but the Inner Tube will handle much higher than recommended inflation rates... Therefore this INNOVA inner tube is ideal for heavier or pro riders seeking high inflation pressures...

This INNOVA Inner tube will fit into all known 9 inch tyres as well as most ATB Hubs on the market & it comes as expected with a "Plastic Anti Dust" Valve cap!

Punctures Suck! Its always possible to get a puncture in the environments we ride in, so always carry a spare if you don't want your day spoiling...

PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre

PRIMO's 3 Spoke Composite Hub has a center set bearing position & because of its special '3.75/4 Inch Rim' means it is capable of fitting both 3.75 Inch Rim Tyres (8 Inch Tyres) & 4 Inch Rim Tyres (9 inch Tyres). 

 The 3 Spoke PRIMO hubs are assembled using just 3 heavy duty M6 x 30mm Stainless Steel Socket capped Bolts & M6 Nylock nuts. The Composite hub is very Strong but a bit Chunky. IMO its best fitted with 9 Inch Tyres or Any tyre using a 4 inch Rim.

Because of the extra size of this hub it is strong ebough for many applicatuons. When comparing the weight to the super slim design of the PHATLADS hubs (weighing just 184g), the PRIMO 3 Spoke hub weighing 282g does weigh in a little on the heavy side, but the 3 spoke'd solid structure is a timeless classic with an awesome reputation for not letting you down & is currently the only option hub that TRAMPA offers should you wish to mount 'Center-Set 9 inch Wheels'

Although slightly tighter to fit into than other hubs, TRAMPA's regular 28mm Bearings will fit perfectly into the Bearing housing of the PRIMO hub. As a top tip place the bearings in the freezer for 30 minutes before inserting them into the hub, the cold will cause the metal of the bearing to shrink & fit easier into the hub!

To fit the PRIMO 3 spoke hubs onto the TRAMPA TRUCKS you will need a special 12x 9.5mm Axle Spacer to allow the hub to position onto the axle correctly.

Bearings can be purchased at a discounted price when purchased with Hubs.

10 inch Tyres MEASURE 10x 3.5x 4 and fit onto 4 Inch Rims

All 10 inch Tyres will fit with DEEPDISH MEGASTARS & PRIMO 3 SPOKE Hubs. The extra size makes them perfect for go-karts, golf buggys, trikes, tractors & countless other applications.

The larger circumference means less roll-resistance,  allowing greater top speeds. The extra width means the tyres have greater surface contact, meaning greater grip! Ideal for offroad & hill-climbing apllications


COMING SOON!!
 

10 Inch Tyres will only fit to the 3 spoke PRIMO Hub or the 9 Inch Deep Dish MEGASTAR Hubs.

Used primarilly outside the princliples of Mountainboarding, these Large tyres can be adapted to fit to all kinds of creations, projects & developments.

The PRIMO & MEGASTAR Hubs with 10 Inch Tyres can be fitted onto 12mm Axles using 12x28x8mm ATB Bearings

10 Inch Tyres have 4 inch rims & will only fit to the PRIMO 3 Spoke Composite Hubs (Pinched), the PHATLADS (Pinched), the Amazing Off-SET MEGASTAR 9 (pinched) & best fit of all, the DEEP-DISH MEGASTAR 9 Rims

1x PRIMO 3 spoke Hub - Fits the 9 inch stiker tyre
3x M6 x 30 Socket cap Allen-Key Stainless Steel Bolt
3x M6 Nut - Marine Grade Stainless steel Nylock nut
1x 10 inch Tyres MEASURE 10x 3.5x 4 and fit onto 4 Inch Rims
1x 10 INCH Inner Tube - INNOVA
Weight: 1,222g
Which 10 Inch Tyre do you want?
Which 10 Inch Tyre do you want?

10 Inch TRACTOR Tyre
10 Inch TRACTOR Tyre

10 Inch ENDURO Tread Tyre
10 Inch ENDURO Tread Tyre

10 Inch INLINE Tyre
10 Inch INLINE Tyre

10 Inch SLICKCUT Tyre
10 Inch SLICKCUT Tyre

Quantity required:
We have enough parts to make…  
RRP FROM £40 - per wheel

Excluding VAT
HCC: 9503001000

Approx price :
To see shipping prices delivered to your door please create an account and be logged into the system, so the system knows where you are and how much to quote you......

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon