This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

VESC 6 PLUS Benjamin Vedder Electronic Speed Controller

VESC 6 PLUS Benjamin Vedder Electronic Speed Controller 1x VESC 6 PLUS In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special 1x VESC 6 PLUS In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special 2x VESC 6 PLUS In CNC T6 Silicone Sealed Aluminium Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special 4x VESC 6 PLUS In CNC T6 Silicone Sealed Aluminum Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special 10x VESC 6 PLUS In CNC T6 Silicone Sealed Aluminum Box with Genuine XT90 Connectors - Vedder Electronic Speed Controller TRAMPA Special  VESC 6 PLUS Benjamin Vedder Electronic Speed Controller 15cm Motor Cables VESC 6 CNC Aluminum Heat Sink Silicone Sealed Housing BLACK Silicon Cable with WHITE TRAMPA logo 4mm Core Top Quality BIAFF electrical Cable price per 10cm RED Silicon Cable with BLACK TRAMPA logo 4mm Core Top Quality BIAFF electrical Cable price per 10cm XT90H-M connector - Male 4mm FEMALE Bullet connector - Plugs into MOTOR Cables
RRP
£225
inc tax

BLACK Silicon Cable with WHITE TRAMPA logo 4mm Core Top Quality BIAFF electrical Cable price per 10cm

Allow your Electric board to gain the maximum performance by only fitting the very highest quality Electrical Cables & Connectors to let the power in your battery flood out as performance at the wheel!! Its taken a serious wedge of cash to get what we wanted & a hell of a long time waiting for our turn to produce to such a small amount of cable at such a high quality standard, but finally TRAMPA has got what it wanted & has now taken delivery of its own Super high Quality Silicon Cables in RED & BLACK with contrasting Black & White TRAMPA logos to prove the quality & show off the kind of performance your board is harvesting! :-)

TRAMPA's Gorgeous Silicon cables are made by the same GERMAN company who makes the world Famous BLAFF Cables. BLAFF cable is used for highest demanding jobs where performance is critical. BLAFF's Cables are so good they are used for public Transportation and the likes (Trains, Trams, Planes) as they have a global reputation of incredible high standards. 

Enclosed in the Besilen insulated​ Silicon Outer lies 1800 Highly flexible TOP QUALITY Copper strands in the center...

BLACK Silicon Casing with contrasting WHITE TRAMPA logo's
Copper Core Dimension - 4mm
Outer Casing Dimension - 4.7mm
Temperature Range -
- Flexible use -25ºC / +180ºC
- Fixed laying -40ºC / +180ºC
Normal Voltage Uo/U 300/300V
Copper used weight 38.4kg per 1000 meters = 3.84 grams per centimeter + casing

RED Silicon Cable with BLACK TRAMPA logo 4mm Core Top Quality BIAFF electrical Cable price per 10cm

Allow your Electric board to gain the maximum performance by fitting the very highest quality Electrical Cables & Connectors and let the power in your battery flood out as performance at the rear wheels!! Its taken a serious wedge of cash to get what we wanted & a hell of a long time waiting for our turn in production to produce to such a small amount of such a high quality cable, but finally TRAMPA has had what it wanted delivered & we can now supply you with Super high Quality Silicon Cables in RED or BLACK with co-orinating BLACK & WHITE TRAMPA logos to prove the quality & show off the kind of performance your board is capable of! :-)

TRAMPA's gorgeous Silicon cables are made by the same GERMAN company who makes the world Famous BLAFF Cables. The Blaff cables have enclosed in the Besilen insulated​ Silicon Outer sleeve, 1800 Highly flexible TOP QUALITY Copper strands in the center... BLAFF cable is used for the highest demanding jobs where performance is critical. BLAFF's Cables are so good they are used for public Transportation (Trains, Trams, Planes) as they have a global reputation of incredible high standards.

TRAMPA Silicon cables solder perfectly into XT60 & XT90 connectors to give the perfect connection to your power source. A soldering service for a pair of cables is available though TRAMPA when you purchase the cables as pairs,

RED Silicon Casing with contrasting BLACK TRAMPA logo's
Copper Core Dimension - 4mm
Outer Casing Dimension - 4.7mm
Temperature Range -
- Flexible use -25ºC / +180ºC
- Fixed laying -40ºC / +180ºC
Normal Voltage Uo/U 300/300V
Copper used weight 38.4kg per 1000 meters = 3.84 grams per centimeter + casing

BLACK Silicon Cable with WHITE TRAMPA logo 4mm Core Top Quality BIAFF electrical Cable price per 10cm

Allow your Electric board to gain the maximum performance by only fitting the very highest quality Electrical Cables & Connectors to let the power in your battery flood out as performance at the wheel!! Its taken a serious wedge of cash to get what we wanted & a hell of a long time waiting for our turn to produce to such a small amount of cable at such a high quality standard, but finally TRAMPA has got what it wanted & has now taken delivery of its own Super high Quality Silicon Cables in RED & BLACK with contrasting Black & White TRAMPA logos to prove the quality & show off the kind of performance your board is harvesting! :-)

TRAMPA's Gorgeous Silicon cables are made by the same GERMAN company who makes the world Famous BLAFF Cables. BLAFF cable is used for highest demanding jobs where performance is critical. BLAFF's Cables are so good they are used for public Transportation and the likes (Trains, Trams, Planes) as they have a global reputation of incredible high standards. 

Enclosed in the Besilen insulated​ Silicon Outer lies 1800 Highly flexible TOP QUALITY Copper strands in the center...

BLACK Silicon Casing with contrasting WHITE TRAMPA logo's
Copper Core Dimension - 4mm
Outer Casing Dimension - 4.7mm
Temperature Range -
- Flexible use -25ºC / +180ºC
- Fixed laying -40ºC / +180ºC
Normal Voltage Uo/U 300/300V
Copper used weight 38.4kg per 1000 meters = 3.84 grams per centimeter + casing

VESC 6 PLUS Benjamin Vedder Electronic Speed Controller 15cm Motor Cables

We are introducing the amazing VESC® SIX PLUS Speed Controller.
The VESC® 6 PLUS is the successor of the world famous VESC 6.  When we developed the VESC 75/300, we knew that most of its features would be handy to have in a VESC 6 format.  In consequence Benjamin Vedder took the challenge and re-designed the entire PCB of the VESC 6 to make the new powerful features available in a smaller and cheaper 60V rated package. The SIX PLUS features THREE PHASE SHUNTS & adjustable CURRENT + VOLTAGE FILTERS allowing any motor attached to be detected more precisely and reliably than ever before. In consequence all kinds of motors now run smooth as
silk on a shoeshine and react PERFECTLY LINEAR to throttle input commands. In addition to these massive improvements you will find a IMU chip fitted , featuring a gyroscope, accelerometers and a compass, allowing the VESC to know its 3D orientation in space, 3 axis acceleration values and directions. UAVCAN has been added to the VESC 6 PLUS firmware allowing to interact with commonly used flight controllers like the PIXHAWK ®* devices. Incredible 12,000 lines of code have been added for the new hardware releases.
To make the VESC nearly indestructible, the low voltage rails were redesigned A-Z. Last but not least, the VESC 6 Plus & VESC 75/300 made Mr. Vedder putting tons of effort into a new VESC-Tool software and firmware.

VESC-Tool is now available as a mobile Android™* compatible App, allowing to configure your VESC or VESC array with a few clicks only. User specific PROFILES will let you change in between different setups with a single click and on the fly, while the motor is spinning. Using a original VESC 6 PLUS, motor detection is now more precise than ever before and pretty much a guarantee, even for very beastly motors that were troublesome to detect in the past. Extreme low inductance (0.5 μH) motors are no issue! Parameters for gearing and wheel diameter have been added, allowing display of speed, Wh usage per distance traveled, precise computation of estimated range, precise battery indicator, current consumption, duty cycle and power. Beautiful self adjusting analog displays make the readings of all parameters very enjoyable.

What makes the original VESC hardware so special?

The original hardware is perfectly matched to work seamless withe VESC-Tool software code. Both, hardware and software, have been designed by the same engineer, knowing all critical detail.

TRAMPA BOARDS LTD has teamed up with the internationally renowned 'YODA of electronics' (Benjamin Vedder) to bring to the world the most advance electronic speed controllers ever to be produced! Benjamin's family name is Vedder & the V in the name VESC represents this. VESCVEDDERs Electronic Speed Controller! There have been many ESC's before, but now the VESC line of products officially exists, made to work seamless with the latest software developments. Benjamin is globally renowned for his incredible electronics and software skills. He has worked tirelessly for well over 7 years fine tuning preceding versions of the globally famous & Trade Marked VESC products & after teaming up with TRAMPA BOARDS Ltd the development of the VESC product line has taken him to his highest capability yet.

The TRAMPA VESCs  comes fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality German copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are genuine Amass XT90s connectors one side & 4mm Gold Plated Bullet connectors the other. The V6 Plus is installed with a custom moulded Internal Silicone Seal & is neatly fitted into the Heat sink which is a Solid Block of CNC'd  6061T6  Aluminum, used for dispensing the heat and offering maximum protection, allowing easy fitting and maximum good looks!..

The VESC line of produces are the most powerful & impressive Electric Speed Controller Benjamin has ever envisioned! They are  arguably by far the best and most versatile Electronic Speed Controllers the world has ever seen!! E Boarding, E-Biking, Remote control of all kinds including Drones & Robotics and Camera equipment (as well as thousands of industrial & recreational applications) are all about to be revolutionized by using the VESC series of products that will all come to the market soon...

Using the a VESC in your TRAMPA BOARD setup (Regardless of which model) will allow you to add any battery up to 12s with 60V of peak voltage. This is the perfect limit to give you incredible performance from your electric TRAMPA motors or similar. Using the new VESC TOOL, you will be able to fine tune your performances relevant to your application, where you will be able to calculate your top end speeds & approx distance to travel using different combinations of power & gearing settings. Beautiful!

VESCs comes to you ready to plug in & go! They are delivered to you in a very stylish precision cut 6061 T6 aluminum heat-sink housing which has the TRAMPA & VESC logo beautifully laser etched to its surface & for further splash proofing we have invested into another mould for additional exterior Silicone Sealing which is available as an accessory to purchase.

The performance of the TRAMPA VESCs, compared to preceding third party models, is light years ahead! This is demonstrated in the cost as cheap non effective clones are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run and is a guarantee for ultimate performance and max compatibility with future software releases.

Our VESCs are being configured with the brand new Open Source, GPL V3 licensed VESC®-Tool Software:  www.vesc-project.com and on the Google Play Store™*.
The Open source, GPL V3 licensed VESC
Firmware will come pre-installed on the device, allowing us to do extra testing of the device, prior to shipping.
This is the GPL V3 license contract for your reference:  www.vesc-project.com/GPL V3

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters
- built in IMU chip (accelerometer, gyro, compass)
- Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V!
- Current: Continuous 80A, Burst 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

VESC Vedder Electronic speed Controllers Due out Soon!

VESC 6 CNC Aluminum Heat Sink Silicone Sealed Housing

CNC T6 Aluminum box Houses the VESC 6 perfectly

Measures 75 x 70 x 18mm

 

VESC Vedder Electronic speed Controllers Due out Soon!

Introducing the amazing VESC® SIX PLUS Speed Controller.
The VESC® 6 PLUS is the successor of the world famous VESC 6.  When we developed the VESC 75/300, we knew that most of its features would be handy to have in a VESC 6 format.  In consequence Benjamin Vedder took the challenge and re-designed the entire PCB of the VESC 6 to make the new powerful features available in a smaller and cheaper 60V rated package. The SIX PLUS features THREE PHASE SHUNTS & adjustable CURRENT + VOLTAGE FILTERS allowing any motor attached to be detected more precisely and reliably than ever before. In consequence all kinds of motors now run smooth as silk on a shoeshine and react PERFECTLY LINEAR to throttle input commands. In addition to these massive improvements you will find a IMU chip fitted , featuring a gyroscope, accelerometers and a compass, allowing the VESC to know its 3D orientation in space, 3 axis acceleration values and directions. UAVCAN has been added to the VESC 6 PLUS firmware allowing to interact with commonly used flight controllers like the PIXHAWK ®* devices. Incredible 12,000 lines of code have been added for the new hardware releases.
To make the VESC nearly indestructible, the low voltage rails were redesigned A-Z. Last but not least, the VESC 6 Plus & VESC 75/300 made Mr. Vedder putting tons of effort into a new VESC-Tool software and firmware.

VESC-Tool is now available as a mobile Android™* compatible App, allowing to configure your VESC or VESC array with a few clicks only. User specific PROFILES will let you change in between different setups with a single click and on the fly, while the motor is spinning. Using a original VESC 6 PLUS, motor detection is now more precise than ever before and pretty much a guarantee, even for very beastly motors that were troublesome to detect in the past. Extreme low inductance (0.5 μH) motors are no issue! Parameters for gearing and wheel diameter have been added, allowing display of speed, Wh usage per distance traveled, precise computation of estimated range, precise battery indicator, current consumption, duty cycle and power. Beautiful self adjusting analog displays make the readings of all parameters very enjoyable.

What makes the original VESC hardware so special?

The original hardware is perfectly matched to work seamless withe VESC-Tool software code. Both, hardware and software, have been designed by the same engineer, knowing all critical detail.

TRAMPA BOARDS LTD has teamed up with the internationally renowned 'YODA of electronics' (Benjamin Vedder) to bring to the world the most advance electronic speed controllers ever to be produced! Benjamin's family name is Vedder & the V in the name VESC represents this. VESCVEDDERs Electronic Speed Controller! There have been many ESC's before, but now the VESC line of products officially exists, made to work seamless with the latest software developments. Benjamin is globally renowned for his incredible electronics and software skills. He has worked tirelessly for well over 7 years fine tuning preceding versions of the globally famous & Trade Marked VESC products & after teaming up with TRAMPA BOARDS Ltd the development of the VESC product line has taken him to his highest capability yet.

The TRAMPA VESCs  comes fitted as standard with TRAMPA's very own & very special Silicone Coated & TRAMPA logo'd cables which are made up of 1036 Strands of Highly Flexible Top quality German copper. These quality details ensure the maximum performance at all times. Attached To the premium copper cables are genuine Amass XT90s connectors one side & 4mm Gold Plated Bullet connectors the other. The V6 Plus is installed with a custom moulded Internal Silicone Seal & is neatly fitted into the Heat sink which is a Solid Block of CNC'd  6061T6  Aluminum, used for dispensing the heat and offering maximum protection, allowing easy fitting and maximum good looks!..

The VESC line of produces are the most powerful & impressive Electric Speed Controller Benjamin has ever envisioned! They are  arguably by far the best and most versatile Electronic Speed Controllers the world has ever seen!! E Boarding, E-Biking, Remote control of all kinds including Drones & Robotics and Camera equipment (as well as thousands of industrial & recreational applications) are all about to be revolutionized by using the VESC series of products that will all come to the market soon...

Using the a VESC in your TRAMPA BOARD setup (Regardless of which model) will allow you to add any battery up to 12s with 60V of peak voltage. This is the perfect limit to give you incredible performance from your electric TRAMPA motors or similar. Using the new VESC TOOL, you will be able to fine tune your performances relevant to your application, where you will be able to calculate your top end speeds & approx distance to travel using different combinations of power & gearing settings. Beautiful!

VESCs comes to you ready to plug in & go! They are delivered to you in a very stylish precision cut 6061 T6 aluminum heat-sink housing which has the TRAMPA & VESC logo beautifully laser etched to its surface & for further splash proofing we have invested into another mould for additional exterior Silicone Sealing which is available as an accessory to purchase.

The performance of the TRAMPA VESCs, compared to preceding third party models, is light years ahead! This is demonstrated in the cost as cheap non effective clones are sold according to their price not their quality. If you want the best performance then stick to the original hardware source - it will save you a lot of money on the long run and is a guarantee for ultimate performance and max compatibility with future software releases.

Our VESCs are being configured with the brand new Open Source, GPL V3 licensed VESC®-Tool Software:  www.vesc-project.com and on the Google Play Store™*.
The Open source, GPL V3 licensed VESC Firmware will come pre-installed on the device, allowing us to do extra testing of the device, prior to shipping.
This is the GPL V3 license contract for your reference:  www.vesc-project.com/GPL V3

Features

- Current and voltage measurement on all phases (three phase shunts)
- Adjustable current and voltage filters
- built in IMU chip (accelerometer, gyro, compass)
- Regenerative braking
- Traction control (single and twin setup)
- Sensored or sensor less operation + hybrid mode
- Configurable RPM-, current-, voltage- and power limits
- Input source: PPM, Analog, NRF Nyko Kama Nunchuck
- Communication ports: USB, CAN,UAVCAN, UART
- Throttle curve and ramping for all input sources
- Separate throttle curves for acceleration and brakes
- Seamless 4-quadrant operation
- Motor revolution, amp hour, watt hour counting
- Display of speed, power, duty cycle, amp flow, estimated range and battery status on App
- Accumulated data from arrays of VESCs
- Real time data analysis and read out via communication ports
- Real time data analysis and read out via VESC-Tool APP or VESC-Tool software
- Adjustable protection against:

          -    Low input voltage
          -    High input voltage
          -    High motor current
          -    High input current
          -    High regenerative braking current (separate limits for the motor and the input)
          -    High RPM (separate limits for each direction).
          -    Over temperature (MOSFET and motor)

Technical Data Sheet

- Voltage: 11.1V – 60V (Safe for 3S to 12S LiPo).
- Voltage spikes may not exceed 60V!
- Current: Continuous 80A, Burst 120A.  Values depend on the temperature and air circulation around the device!
- 5V 1A output for external electronics
- 3.3V 0,5A output for external electronics
- Modes: DC, BLDC, FOC (sinusoidal)
- Supported sensors: ABI, HALL, AS5047

* Android is a trademark of Google LLC.
Google and Play Store are trademarks of Google LLC.
PIXHAWK is a trademark of Lorenz Meier

VESC Box Length 75mm
VESC Box Width 70mm
VESC Box Height 18mm
XT90 cable length approx 70mm
4mm Gold Plated Bullet Connetor cable length 270mm
VESC 6 PLUS Benjamin Vedder Electronic Speed Controller 15cm Motor Cables
VESC 6 CNC Aluminum Heat Sink Silicone Sealed Housing
BLACK Silicon Cable with WHITE TRAMPA Logo - per 10cm
RED Silicon Cable with BLACK TRAMPA Logo - per 10cm
XT90H-M connector - Male
BLACK Silicon Cable with WHITE TRAMPA Logo - per 10cm
4mm FEMALE Bullet connector - GC4010-F
Weight: 162g
How many VESC do you want?
How many VESC do you want?
1x VESC 6+ £225 (inc Tax) Each 1x VESC 6+ £225 (inc Tax) Each
2x VESC 6+ £ 220 (inc Tax) Each 2x VESC 6+ £ 220 (inc Tax) Each
4x VESC 6+ £210 (inc Tax) Each 4x VESC 6+ £210 (inc Tax) Each
10x VESC 6+ £200 (inc Tax) Each 10x VESC 6+ £200 (inc Tax) Each

Using the VESC Connect NRF Dongle you can wirelessly connect through the VESC-TOOL App (Available on the Play Store on Adroid only) to be able to fine tune your VESC settings....

Would you like to purchase a Wireless VESC Connect Dongle?
Would you like to purchase a Wireless VESC Connect Dongle?
Yes please supply me with a Wireless VESC Connect Dongle (+£25) Yes please supply me with a Wireless VESC Connect Dongle (+£25)
NO VESC Connect Dongle required thanks
Would you like a carbon fibre VESC mounting plate & fixing bolts?
Would you like a carbon fibre VESC mounting plate & fixing bolts?
Please supply a single VESC Carbon plate & Fixing Bolts (+£10) Please supply a single VESC Carbon plate & Fixing Bolts (+£10)
NO VESC mounting plate THANKS
Would you like to add an External Water resistant Silicone Seal?
Would you like to add an External Water resistant Silicone Seal?
Yes please add an External Silicone Seal (+£10) Yes please add an External Silicone Seal (+£10)
NO Silicone Seal Thanks
Quantity required:
We have enough parts to make…  
RRP £225 for 1x VESC 6+ = £187.5 + tax each VESC

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon