This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Custom HYPA hub with Gummies 125mm Longboard Wheel Tyre

Custom HYPA hub with Gummies 125mm Longboard Wheel Tyre Custom HYPA hub with Gummies 125mm Longboard Wheel Tyre Custom HYPA hub with Gummies 125mm Longboard Wheel Tyre Custom HYPA hub with Gummies 125mm Longboard Wheel Tyre CUSTOM HYPA HUB BLACK GUMMIES tyres Ultimate Grip - 75a Super Grip
RRP
£30
inc tax

M4 x 35mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 35mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This Bolt is used to assemble the TRAMPA HYPA HUBS. The socket capped head of the Bolt fits neatly into the Bolt housing of the HYPA HUB marrying into the M4 nut located in the housing on the other side of the hub.

Weighing just 3 grams each these bolts are very lightweight. They look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You will need a 3mm Allen Key to tighten & loosen the Nuts & Bolts from the hub. Ensure all your Nuts & Bolts are tight before riding!

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

Wheel support spacer for all TRAMPA Wheels on 12mm ATB Axles - CNC precision 12mm x 16mm x 18.2mm

This special Spacer measures 12mm (id) x 16mm (od) x 18.2mm (long) & has 2 uses!. It is firstly known as the Bearing Support Spacer as this Spacer fits between the Bearings of a 6 Spoked HYPA Hub, (when mounting the HYPA wheel onto 12mm Axles) & secondly it is also known as the AXLE SUPPORT SPACER as this spacer is also used to position any of the TRAMPA wheels in the perfect position onto the axles of 12mm TRAMPA Spring trucks....

TRAMPA spacers are produced as one long tube. The Tube is Heat Treated to gain extra strength & is then Bead Polished to give the metal extra surface protection & a shiny best appearance. The tube is then cut to the exact length for precision mounting. 

BLACK GUMMIES tyres Ultimate Grip - 75a Super Grip

TRAMPA's new & AMAZING 125mm GUMMIES Tyres are a 'Revolution' in the boarding world ;-) The GUMMIES Wheels are so good its as if the Longboard wheel has just been re-invented! The Gummies Tyres fit too & transform the performance of both of TRAMPA's HYPA & SUPERSTAR off road wheels, converting them into Supersized Longboard style wheels & are a completely new sensation & divine dream to ride!

Being 125mm in Diameter the GUMMIES Tyres are much larger than any other Longboard wheel on the market, whilst using High Quality SUPERSOFT Urethane (75a-78a) & the same 50mm wide surface contact as the TRAMPA Stickies Longboard wheels not only do the GUMMIES Tyres perform like their name suggest (When riding on fresh tarmac / asphalt - Hard Packed surfaces, the GUMMIES Tyres stick like 'XXXX to a blanket' allowing the most insane turns & carves that you would not believe were possible) BUT the Super Soft Ultra Premium Urethane we have used also allows the GUMMIES Wheels to glide over cracks in the pavement & smash through the small obstacles that often get in the way when cruising around town, potentially jamming up smaller sized longboard wheels which can be well scary when it happens!!

Boarding of all kinds has recently seen a massive revolution with many new riders coming on the scene adding electric motors & powerful batteries to their boards, you could say much of the equipment being used by other brands is just not up to the job,  riding small wheels on high speed electric boards can be frightening and well when you hook up the TRAMPA GUMMIES wheels onto one of the new TRAMPA Electric Boards, the GUMMIES tyre performace comes into a whole new universe of riding experience that nobody ever knew existed before...!! All of TRAMPA's electric boards are all incredibly powerful, just the most un-real performance is experienced like nothing else ever.... Honest! Fitting a set of GUMMIES to 16 Inch wide ATB Spring Trucks in place of off road tyres converts your Mountainboard into a Street Monster, Racing around places like go-kart tracks will soon become the latest thing too do & we know the mega grippy GUMMIES tyres will become the #1 choice of all serious high speed riders.....

Currently on forward order, they will only available in BLACK 78a Soft premium Urethane which is the perfect colour to tie in with any Combination of HYPA or SUPERSTAR hub in the TRAMPA range.

The GUMMIES Tyres will only fit TRAMPA HYPA or SUPERSTAR hubs, which in turn fit to any of the TRAMPA Truck Steering Systems.

Diameter - 125mm
Width - 52mm
Surface contact - 50mm
Fits to - HYPA & SUPERSTAR Hubs (9.525mm or 12mm Bearings)
Fits to - All 9.525 or 12mm TRAMPA Axles with 34.2mm of clearance.

TRAMPA's new & AMAZING 125mm GUMMIES Tyres are a 'Revolution' in the boarding world ;-) The GUMMIES Wheels are so good its as if the Longboard wheel has just been re-invented! The Gummies Tyres fit too & transform the performance of both of TRAMPA's HYPA & SUPERSTAR off road wheels, converting them into Supersized Longboard style wheels & are a completely new sensation & divine dream to ride!

Being 125mm in Diameter the GUMMIES Tyres are much larger than any other Longboard wheel on the market, whilst using High Quality SUPERSOFT Urethane (75a-78a) & the same 50mm wide surface contact as the TRAMPA Stickies Longboard wheels not only do the GUMMIES Tyres perform like their name suggest (When riding on fresh tarmac / asphalt - Hard Packed surfaces, the GUMMIES Tyres stick like 'XXXX to a blanket' allowing the most insane turns & carves that you would not believe were possible) BUT the Super Soft Ultra Premium Urethane we have used also allows the GUMMIES Wheels to glide over cracks in the pavement & smash through the small obstacles that often get in the way when cruising around town, potentially jamming up smaller sized longboard wheels which can be well scary when it happens!!

Boarding of all kinds has recently seen a massive revolution with many new riders coming on the scene adding electric motors & powerful batteries to their boards, you could say much of the equipment being used by other brands is just not up to the job,  riding small wheels on high speed electric boards can be frightening and well when you hook up the TRAMPA GUMMIES wheels onto one of the new TRAMPA Electric Boards, the GUMMIES tyre performace comes into a whole new universe of riding experience that nobody ever knew existed before...!! All of TRAMPA's electric boards are all incredibly powerful, just the most un-real performance is experienced like nothing else ever.... Honest! Fitting a set of GUMMIES to 16 Inch wide ATB Spring Trucks in place of off road tyres converts your Mountainboard into a Street Monster, Racing around places like go-kart tracks will soon become the latest thing too do & we know the mega grippy GUMMIES tyres will become the #1 choice of all serious high speed riders.....

GUMMIES are currently available in BLACK BLUE or RED but all in the same super gummy 75-78a Soft Premium Urethane. The GUMMIES Tyres will only fit to TRAMPA Hubs HYPASUPERSTAR or AMAZING 8 inch MEGASTAR hubs, which in turn fit to any of the TRAMPA Truck Steering Systems and now using the new SPOKE SUPPORT CONVERSION SPACERS that fit to both the SUPERSTAR Hubs & the MEGASTAR hubs

Diameter - 125mm
Width - 52mm
Surface contact - 50mm
Fits to - HYPA & SUPERSTAR Hubs (9.525mm or 12mm Bearings)
Fits to - All 9.525 or 12mm TRAMPA Axles with 34.2mm of clearance.

MATT BLACK 6 spoke HYPA Hub
M4 x 35mm Marine Grade Stainless steel Socket Capped Bolt
M4 Nut - Marine Grade Stainless steel Nylock Nut
12 x 16mm Wheel Support Spacer for all TRAMPA Wheels on 12mm ATB Axles
Gummy Tyre: BLACK GUMMIES tyres Ultimate Grip - 75a Super Grip
Inflated Wheel Diameter 4.75in
Inflated Wheel Width 2in
Weight: 478g
What colour Hypa hub would you like ?
What colour Hypa hub would you like ?
Matt Black Hypa hub Matt Black Hypa hub
Matt Grey Hypa Hub Matt Grey Hypa Hub
Matt White Hypa hub  - OUT OF STOCK Matt White Hypa hub - OUT OF STOCK
Pimp Chrome Hypa Hub (+£5) Pimp Chrome Hypa Hub (+£5)
Army Camo Hypa hub (+£5) Army Camo Hypa hub (+£5)
Black Gloss Hypa hub (+£2.50) Black Gloss Hypa hub (+£2.50)
Blue with Black logo's Hypa hub (+£5) Blue with Black logo's Hypa hub (+£5)
Blue with White logo's Hypa hub (+£5) Blue with White logo's Hypa hub (+£5)
Carbon Fiber Print Hypa hub (+£5) Carbon Fiber Print Hypa hub (+£5)
Red Gloss Black logo (+£5) Red Gloss Black logo (+£5)
White Gloss Black Logo (+£5) White Gloss Black Logo (+£5)
White Gloss Blue Logo (+£5) White Gloss Blue Logo (+£5)
White Gloss Red Logo (+£5) White Gloss Red Logo (+£5)
Winter Camo (+£5) Winter Camo (+£5)
Do you wish to purchase some 50% Discounted priced Bearings to fit into your wheels? Should you decide to purchase some discounted priced Bearings for your HYPA wheels you will also receive the correct sized Internal Bearing Support Spacer to match the Bearing size.
Do you require some Bearings & Spacers?
Do you require some Bearings & Spacers?
RED ATB Bearings - 12mm Axles (+£2.50) RED ATB Bearings - 12mm Axles (+£2.50)
BLUE ATB Bearings - 12mm Axles (+£2.50) BLUE ATB Bearings - 12mm Axles (+£2.50)
BLACK ATB Bearings - 12mm Axles (+£2.50) BLACK ATB Bearings - 12mm Axles (+£2.50)
RED ATB Bearings & 9.525mm Bearing Reducer  (+£5) RED ATB Bearings & 9.525mm Bearing Reducer (+£5)
BLUE ATB Bearings & 9.525mm Bearing Reducers  (+£5) BLUE ATB Bearings & 9.525mm Bearing Reducers (+£5)
BLACK ATB Bearings & 9.525mm Bearing Reducers (+£5) BLACK ATB Bearings & 9.525mm Bearing Reducers (+£5)
RED 9.525mm Bearings for 9.525mm Axles (+£2.50) RED 9.525mm Bearings for 9.525mm Axles (+£2.50)
NO Bearings required Thanks
Quantity required:
We have enough parts to make…  
RRP £30 - per wheel

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon