This site is best viewed in Google Chrome, Firefox or Safari. The site uses cookies for e-commerce functionality. Click here to remove this message.

Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres

Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres Custom MEGASTAR Hub with Low Profile 6.5 Inch URBAN Treads Tyres CUSTOM MEGASTAR HUB! Build the SUPERSTAR Hub of your dreams!! Any combination possible... CUSTOM MEGASTAR HUB! Build the SUPERSTAR Hub of your dreams!! Any combination possible... CUSTOM MEGASTAR HUB! Build the SUPERSTAR Hub of your dreams!! Any combination possible... CUSTOM MEGASTAR HUB! Build the SUPERSTAR Hub of your dreams!! Any combination possible... CUSTOM MEGASTAR HUB! Build the SUPERSTAR Hub of your dreams!! Any combination possible... TRAMPA's 6.5 inch URBAN TREADS Tyres is the perfect all round tyre for Urban & City riding 7 Inch Inner Tube - INNOVA
RRP
£75
inc tax

M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel with locking paste

TRAMPA's M4 x 40mm Socket Capped Bolt is made using A4 Marine Grade Stainless Steel. This very special TRAMPA Bolt is used to assemble the TRAMPA SUPERSTAR HUBS. Using a 3mm Allen Key the Socket Capped head of the Bolt screws neatly though the SPOKES, through the fixing point in the Rim of the Hub,  passing through the spoke on the other side and eventually screwing into the M4 nut on the other side easly.

Weighing just 3 grams each these bolts are very lightweight. They look very sexy & are totally non corrosive. Using Marine Grade Stainless Steel, means these Bolts will never rust on you! They can cope with the most harsh of weather conditions & they laugh in the face of sandy/salty beaches or muddy freeride tracks, which do turn other manufacturers Nuts & Bolts into corrosive rusting wrecks! As well as being Non Corrosive all of the TRAMPA Bolts are diped in  BLUE THREAD LOCKING PASTE to ensure an extra strong secure fix between the Nut & the Bolt.

You will need a 3mm Allen Key to tighten & loosen the Nuts & Bolts from the hub. Ensure all your Nuts & Bolts are tight before riding!

M4 Nyloc Nut - Marine Grade stainless steel Nylock Nut - Hub Nuts

Introducing TRAMPA's M4 (4mm Shaft) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M4 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to tighten to the M4 Socket Capped Bolts that hold the HYPA & SUPERSTAR hubs together. To fit the nuts M4 use an 8mm spanner or  8mm Ratchet Socket to turn the Nut onto the Bolt whilst holding the bolt with a 3mm Allen Key. Always ensure your Nuts & Bolts are tight before you ride!

M5 Nut - Marine Grade Stainless steel Nylock Nut - Fixes to Trucks & Bindings

Introducing TRAMPA's M5 (5mm Thread) A4 Marine Grade Stainless steel Nylock Nut. This Nylock Nut will fit to all M5 Bolts regardless of their length. This A4 Marine Grade Stainless Steel Nut will never rust on you! It is fitted with the world renowned NYLOCK System (Nylock is a nylon locking system where Nylon is pasted into the threads of the nut so that when the bolt is tightened into the nut the nylon grabs the thread of the bolt holding it locking it in the thread ensuring things do not vibrate loose or fall off when being ridden on rough terrain like that which a Mountain or Kiteboard endures. The NYLOCK thread locking security System is fitted as standard to all TRAMPA Nuts

This Nut is used to fix to the Regular shaped M5 Bolts that hold the TRUCKS to the DECK for all  Decks & also for the Dome Head Bolts connecting the L BRACKETS to the BindingsUse an 8mm spanner or Ratchet Drive to tighten the Nut onto the Bolt. Always ensure your Nuts & Bolts are tight before you ride!

BLACK Anodised Superstar Spoke - Extruded T6 Aluminum Heat treated & CNC Precision milled

TRAMPA's Superstar spokes are produced using 6061 Aero-grade (Top Quality) Aluminum. The Aluminum is forced through an "Extrusion Die". Extrusion means "continuous" which is how our Spokes are made, in one long continuous piece. Once extruded the resulting profile is cooled & then sliced into shape before being hardened through the T6 Heat Treating process. Heat Treating extruded 6061 Alloy makes the Alloy very very strong. 

The spoke is then sent for bead polishing to take away the sharp edges & then the spokes are sent away to the Anodisers to have the relevant colour added. Once the colour has been added, the precision CNC machine is set to work to mill out & accept the bearings into the housing, perfectly!

Check your spoke support spacers are in good condition when inter-changing spokes & ensure all of your nuts & bolts are tight before you ride!

Spoke support Spacer for superstar hub

This is the TRAMPA SUPERSTAR Spoke Support Spacer. It is used to gain extra strength for the SUPERSTAR wheel design by adding support to the Aluminum Spokes when the wheel is being used under high inflated pressures...

Precision injection moulded, using original DuPont materials, this Spacer provides essential support for the Spokes in the Superstar hubs. There is a Deep Shelf on the Rim of the Spacer which pushes into the internal side of the Spoke, positioning the Spacer/spoke perfectly for assembly. The thick plastic ensures a very strong support platform maximising Bearing support & spin rate always....

Ensure all your nuts & bolts are tight before riding!!

TRAMPA's 6.5 inch URBAN TREADS Tyres is the perfect all round tyre for Urban & City riding

TRAMPA's 6.5 Inch Low profile URBAN TREADS tyres have been specifically designed to fit TRAMPA's incredibly strong 6 Spoke HYPA & 5 Spoke SUPERSTAR hubs. My design brief to Frank was simple - make the smallest, best quality pneumatic tyre we possibly can, I want to radically changing the rough ride experience of that when riding with regular style longboard wheels, specially at speed when riding in Urban/City environments.... We all know the pavements & roads are far from a perfect surface so much so that sometimes its almost impossible to ride regular Longboard wheels, some of the pot holes around me are terrible but with these URBAN TREADS tyres fitted you can smash through all the imperfections whilst still enjoying that small wheel feel...

TRAMPA's URBAN TREADS tyres are arguably the PREMIUM TYRE in TRAMPA's range of tyres. Made with whats known a High TPI construction (TPI means Threads Per Inch & the URBAN TREADS tyre uses thousands of very Fine Threads per Inch to stitch between the outer lightweight nylon bands, this in turn gives the construction shape to the tyre) this High TPI means the tyre's construction is incredibly strong whilst still very supple, like a posh bicycle tyre but by smothering the Treads with premium quality HIGH GRIP COMPOUND motorcycle rubber to cover the High TPI construction, not only are the URBAN TREADS Tyre amazingly light weight but it has performance like that to match a premium motorcycle tyre!!

Having a High TPI & using hefty amounts of thick Motorcycle rubber means not only is the construction of the tyre incredibly strong but it will also wear incredibly well too. This extra strength in turn allows the tyre to be run at both, incredibly low tyre pressure or should the circumstances require (such as a skate park where you need to pump hard) inflated to being incredibly hard the URBAN TREADS Tyres can easily handle our factory set limit of 85psi, (but ONLY inflate to 85psi when fitting the URBAN TREADS on to the TRAMPA HYPA or SUPERSTAR hubs) but we have herd of some of the crazy TRAMPA Lab Rats (i mean team riders) are inflating over 100psi (i dont think their pump will allow them to get any more air in haha) & with currently no problems to report... But for sure, if one pop's at 100 psi it will certainly make one hell of a noise!! BANG!!​ haha! :-)

Riding on such a small sized tyre gives the most radical performance change to literally every board in the TRAMPA range. The is no doubt the tyre was developed specifically for the URBAN CARVER BOARD & more in particular the ELECTRIC URBAN CARVE BOARD where both products use a smaller deck & the smaller sized Mini Spring Trucks system,  the smaller board needed a slightly smaller tyre than that of the full sized 8 inch ATB decks to compliment the overall product size, so in true TRAMPA style we made the URBAN TREADS Tyre special for that application but since then we have found over these last cold wet winter months that the 6.5 inch URBAN TREADS tyres have also become the choice tyre for Mountainboards who are maintaining their riding skills in the out of season period by riding in indoor Parks or Tracks, just ask the world famous Brind Brothers - PRO TRAMPA Team riders, who have literally not stopped riding through the winter since the release of these new tyres...

TRAMPA's Electric boards have amazing performance with a top speed of well over 50kmph achievable on all models. When your hitting high speeds like this you need good tyres on your board. Thankfully the URBAN CARVE range of decks are fitted with super sexy 6.5 inch URBAN TREADS Tyres as standard. The reinforced, low profiled, wide center beaded with intelligently designed jagged edge around the side can be run on low inflation pressure which gives enough grip to cut muddy corners or nip down hard packed off road tracks no problem, but can also handle the super inflation for straight line flat out speed. If you wish to ride full speed we 1stly suggest you turn the SPRING ADJUSTERS clockwise to tighten the steering resistance, pre-loading more tension into your springs before you wish to hit high speeds will prevent potential wobble, and if you re beginning to feel a bit of wobble, then you should moce te springs to the outside position before attempting to go any faster. If you still feel speed wobble when the springs are in the outside position, then you should then further Add the TRAMPA DAMPA's to add more resistance to the steering to enable you to be able to go even faster :-)

The Urban Tread tyre doesn't only handle high speeds easily but riding around town where you are likely to be bashing up & down curbs & dealing with cracks in the road or potholes, then you are most likely, or you should be riding at much lower inflation pressures. The lower pressure gives so much comfort on the rougher stuff but of course does increase Drag making it harder for your batteries to perform well...

TRAMPA's 6.5 Inch Low profile URBAN TREADS tyres have been specifically designed to fit TRAMPA's incredibly strong 6 Spoke HYPA & 5 Spoke SUPERSTAR hubs. My design brief to Frank was simple - make the smallest, best quality pneumatic tyre we possibly can, I want to radically changing the rough ride experience of that when riding with regular style longboard wheels, specially at speed when riding in Urban/City environments.... We all know the pavements & roads are far from a perfect surface so much so that sometimes its almost impossible to ride regular Longboard wheels, some of the pot holes around me are terrible but with these URBAN TREADS tyres fitted you can smash through all the imperfections whilst still enjoying that small wheel feel...

TRAMPA's URBAN TREADS tyres are arguably the PREMIUM TYRE in TRAMPA's range of tyres. Made with whats known a High TPI construction (TPI means Threads Per Inch & the URBAN TREADS tyre uses thousands of very Fine Threads per Inch to stitch between the outer lightweight nylon bands, this in turn gives the construction shape to the tyre) this High TPI means the tyre's construction is incredibly strong whilst still very supple, like a posh bicycle tyre but by smothering the Treads with premium quality HIGH GRIP COMPOUND motorcycle rubber to cover the High TPI construction, not only are the URBAN TREADS Tyre amazingly light weight but it has performance like that to match a premium motorcycle tyre!!

Having a High TPI & using hefty amounts of thick Motorcycle rubber means not only is the construction of the tyre incredibly strong but it will also wear incredibly well too. This extra strength in turn allows the tyre to be run at both, incredibly low tyre pressure or should the circumstances require (such as a skate park where you need to pump hard) inflated to being incredibly hard the URBAN TREADS Tyres can easily handle our factory set limit of 85psi, (but ONLY inflate to 85psi when fitting the URBAN TREADS on to the TRAMPA HYPA or SUPERSTAR hubs) but we have herd of some of the crazy TRAMPA Lab Rats (i mean team riders) are inflating over 100psi (i dont think their pump will allow them to get any more air in haha) & with currently no problems to report... But for sure, if one pop's at 100 psi it will certainly make one hell of a noise!! BANG!!​ haha! :-)

Riding on such a small sized tyre gives the most radical performance change to literally every board in the TRAMPA range. The is no doubt the tyre was developed specifically for the URBAN CARVER BOARD & more in particular the ELECTRIC URBAN CARVE BOARD where both products use a smaller deck & the smaller sized Mini Spring Trucks system,  the smaller board needed a slightly smaller tyre than that of the full sized 8 inch ATB decks to compliment the overall product size, so in true TRAMPA style we made the URBAN TREADS Tyre special for that application but since then we have found over these last cold wet winter months that the 6.5 inch URBAN TREADS tyres have also become the choice tyre for Mountainboards who are maintaining their riding skills in the out of season period by riding in indoor Parks or Tracks, just ask the world famous Brind Brothers - PRO TRAMPA Team riders, who have literally not stopped riding through the winter since the release of these new tyres...

TRAMPA's Electric boards have amazing performance with a top speed of well over 50kmph achievable on all models. When your hitting high speeds like this you need good tyres on your board. Thankfully the URBAN CARVE range of decks are fitted with super sexy 6.5 inch URBAN TREADS Tyres as standard. The reinforced, low profiled, wide center beaded with intelligently designed jagged edge around the side can be run on low inflation pressure which gives enough grip to cut muddy corners or nip down hard packed off road tracks no problem, but can also handle the super inflation for straight line flat out speed. If you wish to ride full speed we 1stly suggest you turn the SPRING ADJUSTERS clockwise to tighten the steering resistance, pre-loading more tension into your springs before you wish to hit high speeds will prevent potential wobble, and if you re beginning to feel a bit of wobble, then you should moce te springs to the outside position before attempting to go any faster. If you still feel speed wobble when the springs are in the outside position, then you should then further Add the TRAMPA DAMPA's to add more resistance to the steering to enable you to be able to go even faster :-)

The Urban Tread tyre doesn't only handle high speeds easily but riding around town where you are likely to be bashing up & down curbs & dealing with cracks in the road or potholes, then you are most likely, or you should be riding at much lower inflation pressures. The lower pressure gives so much comfort on the rougher stuff but of course does increase Drag making it harder for your batteries to perform well...

MEGASTAR Rims
Extruded T6 Aluminum BLACK Anodised Spoke - CNC Precision milled
Super strength Dupont NYLON Spoke Support Spacer.
M4 x 40mm Socket Capped Bolt - Marine Grade Stainless steel
M5 Nut - Marine Grade Stainless steel Nylock Nut
Counter weight bolts
Counter weight Nuts
6.5mm URBAN TREADS Tyre
7 Inch Inner Tube - INNOVA
Inflated Wheel Diameter 165mm
Inflated Wheel Width 45mm
Recommended Tyre Inflation from 20 - 85psi
Weight: 590g
What Colour MEGASTAR Rims do you want?
What Colour MEGASTAR Rims do you want?
BLACK MEGASTAR rims BLACK MEGASTAR rims
SILVER MEGASTAR rims SILVER MEGASTAR rims
Please select - What colour Spokes would you like?
Please select - What colour Spokes would you like?
BLACK Anodised Spokes BLACK Anodised Spokes
BLUE Anodised Spokes BLUE Anodised Spokes
BRONZE Anodised Spokes BRONZE Anodised Spokes
GUNMETAL Anodised Spokes GUNMETAL Anodised Spokes
RED Anodised Spokes RED Anodised Spokes
SILVER Anodised Spokes SILVER Anodised Spokes
Do you wish to purchase some 50% Discounted priced Bearings to fit into your wheels? Should you decide to purchase some discounted priced Bearings for your SUPERSTAR wheels you will also receive the correct sized Internal Bearing Support Spacer & Rubber O-Ring to match the Bearing size.
Do you require some Bearings & Spacers?
Do you require some Bearings & Spacers?
RED ATB Bearings - 12mm Axles (+£2.50) RED ATB Bearings - 12mm Axles (+£2.50)
BLUE ATB Bearings - 12mm Axles (+£2.50) BLUE ATB Bearings - 12mm Axles (+£2.50)
BLACK Bearings - 12mm Axles (+£2.50) BLACK Bearings - 12mm Axles (+£2.50)
RED Bearings & 9.525mm Bearing Reducers (+£5) RED Bearings & 9.525mm Bearing Reducers (+£5)
BLUE Bearings & 9.525mm Bearing Reducers  (+£5) BLUE Bearings & 9.525mm Bearing Reducers (+£5)
BLACK Bearings & 9.525mm Bearing Reducers (+£5) BLACK Bearings & 9.525mm Bearing Reducers (+£5)
RED 9.525mm Special Bearings to fit 9.525mm Axles (+£2.50) RED 9.525mm Special Bearings to fit 9.525mm Axles (+£2.50)
NO Bearings Required Thanks
Quantity required:
We have enough parts to make…  
RRP £75 - per wheel

RRP Includes 20% VAT

Non-EU customers purchase tax-free

Approx price :
To see UPS shipping rates you need to login.

menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon menu-icon