Home»Accessories»WHEELS Accessories & TYRE kits»Bearing Sets»R6-2RS 9.525mm Axle LONGBOARD Wheel Bearings»R6-2RS CERAMIC STREET CARVE Bearings x8 - GREEN

9.525 x 13.525 x 10.3mm - Internal Bearing support & External Wheel Support Spacer for STICKIES Wheels on MINI Spring Trucks

Precision made to ensure an accurate fit with no rattles, this Polished, 9.525mm x 13.52mm x 10mm long "precision made Aluminium spacer" fits onto the axles of the Carveboard Trucks & also in-between the Bearings of the Carveboard Wheels. The Bearing Support Spacers get crushed over time from constant tightening, so check the spacer is fitting well and replace if necessary over time.

PRECISION Shim spacer - STAINLESS STEEL - Bridges tiny gaps on axles - 9.525 x 13.525 x 1mm

This tiny STEEL Shim Spacer is precision made to give maximum performance! It is used to hold the bearings in the perfect position & also to bridge tiny gaps on the axles, ensuring an accurate fit with NO rattles!

The Shim spacer slips onto the axle fitting either side of the Bearings when the wheel is being fitted onto 9.525mm Axles.

This tiny spacer positions the wheel perfectly on the axle, holding the Bearing in the best possible place to help achieve maximum spin rate for the wheel. Its little parts like these that suffer the most amount of abuse, especially when they are used in the harsh conditions that they are. Check from time to time they are in good order & possibly replacing them every now & then this good proactice will ensure your board stays in tip-top condition, always!

R6-2RS Si3N4 TRAMPA CERAMIC Street Carve Bearings used to fit STICKIES Longboard Wheels to 9.525mm Axels (9.525 x 22.225 x 7.14mm) - GREEN

These R6-2RS CERAMIC BEARINGS are our best offering yet! Using P4 Chrome Steel for both Inner & Outer Raceways & 7x Si3N4 CERAMIC Bearings mounted in a low friction Nylon cage, they will certainly enhance your ride ahead offering less resistance & therefore increased roll-ability compared to regular Steel bearings... 

TRAMPA's STREET BOARDS (Carveboard & Longboard) use these special 3/8ths of an inch Imperial sized Bearings (Metric size = 9.525 x 22.225 x 7.14mm). They are are an old Skool size that are now made special by TRAMPA to fit the 83 or 90mm STICKIES Longboard style wheels onto the TRAMPA Mini Spring Trucks & the New 12-FIFTIES Extra wide Longboard Trucks which both have 9.525mm axles fitted as standard :-)

To handle the extra forces that a wider than standard 8mm skate Axle may suffer (potentially fitting an electric motor will transform the forces even more so) we choose to beef up & increase the size & thickness of the Axle to a new standard in order to handle the extra abuse they are most likely to suffer, but this means that regular Skate or Longboard 608 Bearings will not fit onto the new thicker 9.525mm Axles, so in order to fit either the TRAMPA Longboard wheels or regular Longboard wheels to the Mini Spring Trucks or the New Extra Wide 12-FIFTIES Longboard Trucks you will need these special R6 2RS Bearings in order to make them fit correctly.

Ceramic Bearings are famed for being less resistant steel bearings which is what makes them so spin fast.... Having less resistance enables Ceramic Bearings to roll faster & further from the same point when directly compared to Steel Bearings. If your using electric power on the back of your board, with Ceramic Bearings fitted all around then you will accelerate faster & your riding range will be bettered for sure.... 

Available with Removable vibrant GREEN sidewalls with the obligatory BLACK TRAMPA logo's & Model, the Ceramic bearings are easy to clean & service whilst being bright Green the R6 2RS Bearings are easy identifiable as being the fastest & will fit to most regular Longboard & Skateboard wheels currently on the market, so if you race a guy with Green Bearings watch out as he may already have the advantage over you...

R6 tells you the bearing standard size & the 2RS means the bearing has 2 Removable Sidewalls. The Removable Rubber sidewalls seal the single row of lubricated ball bearings within the Chrome Steel housings, protecting them from the elements such as dust & dirt, maintaining maximum performance to the board & rider for as long as possible. The rubber sealed sidewalls are embossed with the TRAMPA & CERAMIC logo proving Top Quality & are removable so that you can service & clean your bearings on a regular basis maintaining high performance all of the times!